Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Houston vs Lewisville (2026)

Budget-wise, metal roof installation in Houston ($21,500) runs 11% more than in Lewisville ($19,450), a roughly $2,050 spread.

Houston TX

$13,100 $29,900

Typically around $21,500

Lewisville TX

Lower cost
$11,850 $27,050

Typically around $19,450

Expect to pay roughly $2,050 (11%) more for metal roof installation in Houston than in Lewisville — local labor is the main reason.
Side by side

Houston vs Lewisville: full breakdown

FactorHoustonLewisville
Typical 2026 cost$21,500$19,450
Estimated range$13,100–$29,900$11,850–$27,050
Labor index (vs US)×0.96×0.87
Climate zoneHotHot
Climate factor×1.03×1.03
Local permit$275$250
Labor share$12,900$11,650
Materials/equipment$8,600$7,800

All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.

The verdict

Is the gap worth worrying about?

A 11% gap is meaningful on a project this size — about $2,050. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Houston.

By type

Metal roof installation by type: Houston vs Lewisville

Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypeHoustonLewisville
Corrugated steel (exposed fastener)$9,150$18,050$8,300$16,300
Standing-seam steel$18,050$34,850$16,300$31,500
Aluminum$14,100$27,950$12,750$25,250
Copper$29,900$59,550$27,050$53,800
Zinc$27,950$54,600$25,250$49,350

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Metal roof installation by roof size: Houston vs Lewisville

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeHoustonLewisville
1,000 sq ft (10 squares)$8,200$16,100$7,400$14,550
1,500 sq ft (15 squares)$11,150$23,000$10,050$20,800
2,000 sq ft (20 squares)$13,100$29,900$11,850$27,050
2,500 sq ft (25 squares)$16,100$35,850$14,550$32,400
3,000+ sq ft (30 squares)$19,050$41,750$17,200$37,750

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.

Houston, TX
$29/hr

Houston-Pasadena-The Woodlands metro · about 7% below the US average installer wage.

Lewisville, TX
$24.2/hr

McAllen-Edinburg-Mission metro · about 22% below the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

Our take

Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.

FAQ

Houston vs Lewisville

Is metal roof installation cheaper in Houston or Lewisville?

Lewisville wins on price: metal roof installation runs about $19,450 there versus $21,500 in Houston, a gap of roughly $2,050 (11%) as of 2026.

Why does metal roof installation cost more in Houston than Lewisville?

Houston's higher labor index (0.96 vs 0.87 in Lewisville) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.

How much is metal roof installation in Houston, TX?

metal roof installation in Houston runs $13,100–$29,900 as of 2026 — most jobs land near $21,500.

Do roofing pros really charge more in one city?

Yes — and the wage data shows it. A skilled installer earns about $29/hr in the Houston-Pasadena-The Woodlands area versus $24.2/hr around McAllen-Edinburg-Mission (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.

When is the cheapest time to buy metal roof installation — and does it differ by city?

No, the seasonal pattern is the same in Houston and Lewisville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on metal roof installation cost?

Not really — the $2,050 gap is one-time, and smart timing and tighter quotes in Houston can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik