Metal Roof Installation cost: Honolulu vs Yonkers (2026)
In 2026, metal roof installation is about 7% less expensive in Honolulu than in Yonkers. Most homeowners pay around $24,200 in Honolulu versus $25,800 in Yonkers — a gap of roughly $1,600.
Honolulu HI
Lower costTypically around $24,200
Yonkers NY
Typically around $25,800
Honolulu vs Yonkers: full breakdown
| Factor | Honolulu | Yonkers |
|---|---|---|
| Typical 2026 cost | $24,200 | $25,800 |
| Estimated range | $14,750–$33,650 | $15,700–$35,850 |
| Labor index (vs US) | ×1.08 | ×1.14 |
| Climate zone | Hot | Cold |
| Climate factor | ×1.03 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $14,500 | $15,500 |
| Materials/equipment | $9,700 | $10,300 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
A 7% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Honolulu vs Yonkers
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Honolulu | Yonkers |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,300–$20,300 | $11,000–$21,650 |
| Standing-seam steel | $20,300–$39,200 | $21,650–$41,750 |
| Aluminum | $15,850–$31,400 | $16,900–$33,500 |
| Copper | $33,650–$66,950 | $35,850–$71,350 |
| Zinc | $31,400–$61,400 | $33,500–$65,450 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Honolulu vs Yonkers
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Honolulu | Yonkers |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,200–$18,100 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $12,550–$25,850 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $14,750–$33,650 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $18,100–$40,300 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $21,400–$46,950 | $22,800–$50,050 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
No BLS metro wage series for Honolulu; we use Hawaii regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Honolulu vs Yonkers
Is metal roof installation cheaper in Honolulu or Yonkers?
Honolulu comes out ahead here, at roughly $24,200 for metal roof installation compared with $25,800 in Yonkers — a 7% ($1,600) gap as of 2026.
Why does metal roof installation cost more in Yonkers than Honolulu?
Labor rates explain most of it — 1.14 in Yonkers vs 1.08 in Honolulu. A cold climate versus hot accounts for the rest.
How much is metal roof installation in Honolulu, HI?
In Honolulu, metal roof installation typically runs $14,750–$33,650 in 2026, with most homeowners paying around $24,200.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Honolulu and Yonkers: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $1,600 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Yonkers can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik