Metal Roof Installation cost: Greenfield vs Milwaukee (2026)
Greenfield and Milwaukee are a near-perfect match on metal roof installation cost in 2026, both landing around $23,800.
Greenfield WI
Typically around $23,800
Milwaukee WI
Typically around $23,800
Greenfield vs Milwaukee: full breakdown
| Factor | Greenfield | Milwaukee |
|---|---|---|
| Typical 2026 cost | $23,800 | $23,800 |
| Estimated range | $14,500–$33,050 | $14,500–$33,050 |
| Labor index (vs US) | ×1.05 | ×1.05 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $275 |
| Labor share | $14,300 | $14,300 |
| Materials/equipment | $9,500 | $9,500 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
No real cost edge either way
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Greenfield vs Milwaukee
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Greenfield | Milwaukee |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,100–$19,950 | $10,100–$19,950 |
| Standing-seam steel | $19,950–$38,500 | $19,950–$38,500 |
| Aluminum | $15,550–$30,850 | $15,550–$30,850 |
| Copper | $33,050–$65,800 | $33,050–$65,800 |
| Zinc | $30,850–$60,350 | $30,850–$60,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Greenfield vs Milwaukee
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Greenfield | Milwaukee |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,000–$17,750 | $9,000–$17,750 |
| 1,500 sq ft (15 squares) | $12,300–$25,400 | $12,300–$25,400 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $14,500–$33,050 |
| 2,500 sq ft (25 squares) | $17,750–$39,600 | $17,750–$39,600 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $21,050–$46,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Milwaukee-Waukesha metro · about 8% above the US average installer wage.
Milwaukee-Waukesha metro · about 8% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Greenfield vs Milwaukee
Is metal roof installation cheaper in Greenfield or Milwaukee?
Practically identical — expect around $23,800 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Milwaukee than Greenfield?
The main driver is local labor rates: Milwaukee's labor index is 1.05 versus 1.05 in Greenfield. Climate zone (cold vs cold) also shift the total.
How much is metal roof installation in Greenfield, WI?
In Greenfield, metal roof installation typically runs $14,500–$33,050 in 2026, with most homeowners paying around $23,800.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $33.8/hr in the Milwaukee-Waukesha area versus $33.8/hr around Milwaukee-Waukesha (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Greenfield and Milwaukee: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Greenfield and Milwaukee cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik