Metal Roof Installation cost: Glendale vs Peoria (2026)
Glendale and Peoria are a near-perfect match on metal roof installation cost in 2026, both landing around $21,950.
Glendale AZ
Typically around $21,950
Peoria AZ
Typically around $21,950
Glendale vs Peoria: full breakdown
| Factor | Glendale | Peoria |
|---|---|---|
| Typical 2026 cost | $21,950 | $21,950 |
| Estimated range | $13,400–$30,500 | $13,400–$30,500 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $13,150 | $13,150 |
| Materials/equipment | $8,800 | $8,800 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Glendale vs Peoria
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Glendale | Peoria |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,350–$18,400 | $9,350–$18,400 |
| Standing-seam steel | $18,400–$35,500 | $18,400–$35,500 |
| Aluminum | $14,400–$28,450 | $14,400–$28,450 |
| Copper | $30,500–$60,650 | $30,500–$60,650 |
| Zinc | $28,450–$55,600 | $28,450–$55,600 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Glendale vs Peoria
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Glendale | Peoria |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,350–$16,400 | $8,350–$16,400 |
| 1,500 sq ft (15 squares) | $11,350–$23,450 | $11,350–$23,450 |
| 2,000 sq ft (20 squares) | $13,400–$30,500 | $13,400–$30,500 |
| 2,500 sq ft (25 squares) | $16,400–$36,500 | $16,400–$36,500 |
| 3,000+ sq ft (30 squares) | $19,400–$42,550 | $19,400–$42,550 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Glendale vs Peoria
Is metal roof installation cheaper in Glendale or Peoria?
Practically identical — expect around $21,950 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Peoria than Glendale?
Labor rates explain most of it — 0.98 in Peoria vs 0.98 in Glendale. A hot climate versus hot accounts for the rest.
How much is metal roof installation in Glendale, AZ?
Expect to pay $13,400 to $30,500 for metal roof installation in Glendale in 2026, averaging around $21,950.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29.9/hr in the Phoenix-Mesa-Chandler area versus $29.9/hr around Phoenix-Mesa-Chandler (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Glendale and Peoria: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Glendale and Peoria — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik