Metal Roof Installation cost: Glendale vs Maryvale (2026)
There's essentially no price gap here: metal roof installation runs close to $21,950 in both Glendale and Maryvale in 2026.
Glendale AZ
Typically around $21,950
Maryvale AZ
Typically around $21,950
Glendale vs Maryvale: full breakdown
| Factor | Glendale | Maryvale |
|---|---|---|
| Typical 2026 cost | $21,950 | $21,950 |
| Estimated range | $13,400–$30,500 | $13,400–$30,500 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $13,150 | $13,150 |
| Materials/equipment | $8,800 | $8,800 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Basically a tie — focus on the contractor
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Glendale vs Maryvale
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Glendale | Maryvale |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,350–$18,400 | $9,350–$18,400 |
| Standing-seam steel | $18,400–$35,500 | $18,400–$35,500 |
| Aluminum | $14,400–$28,450 | $14,400–$28,450 |
| Copper | $30,500–$60,650 | $30,500–$60,650 |
| Zinc | $28,450–$55,600 | $28,450–$55,600 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Glendale vs Maryvale
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Glendale | Maryvale |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,350–$16,400 | $8,350–$16,400 |
| 1,500 sq ft (15 squares) | $11,350–$23,450 | $11,350–$23,450 |
| 2,000 sq ft (20 squares) | $13,400–$30,500 | $13,400–$30,500 |
| 2,500 sq ft (25 squares) | $16,400–$36,500 | $16,400–$36,500 |
| 3,000+ sq ft (30 squares) | $19,400–$42,550 | $19,400–$42,550 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Glendale vs Maryvale
Is metal roof installation cheaper in Glendale or Maryvale?
There's no meaningful difference: metal roof installation runs about $21,950 in both places.
Why does metal roof installation cost more in Maryvale than Glendale?
It comes down to labor: Maryvale indexes at 0.98 against Glendale's 0.98. The hot-vs-hot climate difference adds to the gap.
How much is metal roof installation in Glendale, AZ?
Expect to pay $13,400 to $30,500 for metal roof installation in Glendale in 2026, averaging around $21,950.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29.9/hr in the Phoenix-Mesa-Chandler area versus $29.9/hr around Phoenix-Mesa-Chandler (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Glendale and Maryvale, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Glendale and Maryvale — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik