Metal Roof Installation cost: Gilbert vs Glendale (2026)
Metal roof installation costs about the same in Gilbert and Glendale in 2026 — roughly $21,950 in each.
Gilbert AZ
Typically around $21,950
Glendale AZ
Typically around $21,950
Gilbert vs Glendale: full breakdown
| Factor | Gilbert | Glendale |
|---|---|---|
| Typical 2026 cost | $21,950 | $21,950 |
| Estimated range | $13,400–$30,500 | $13,400–$30,500 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $13,150 | $13,150 |
| Materials/equipment | $8,800 | $8,800 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
No real cost edge either way
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Gilbert vs Glendale
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Gilbert | Glendale |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,350–$18,400 | $9,350–$18,400 |
| Standing-seam steel | $18,400–$35,500 | $18,400–$35,500 |
| Aluminum | $14,400–$28,450 | $14,400–$28,450 |
| Copper | $30,500–$60,650 | $30,500–$60,650 |
| Zinc | $28,450–$55,600 | $28,450–$55,600 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Gilbert vs Glendale
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Gilbert | Glendale |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,350–$16,400 | $8,350–$16,400 |
| 1,500 sq ft (15 squares) | $11,350–$23,450 | $11,350–$23,450 |
| 2,000 sq ft (20 squares) | $13,400–$30,500 | $13,400–$30,500 |
| 2,500 sq ft (25 squares) | $16,400–$36,500 | $16,400–$36,500 |
| 3,000+ sq ft (30 squares) | $19,400–$42,550 | $19,400–$42,550 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Gilbert vs Glendale
Is metal roof installation cheaper in Gilbert or Glendale?
metal roof installation costs about the same in both — roughly $21,950 in each city.
Why does metal roof installation cost more in Glendale than Gilbert?
The main driver is local labor rates: Glendale's labor index is 0.98 versus 0.98 in Gilbert. Climate zone (hot vs hot) also shift the total.
How much is metal roof installation in Gilbert, AZ?
Expect to pay $13,400 to $30,500 for metal roof installation in Gilbert in 2026, averaging around $21,950.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $29.9/hr in the Phoenix-Mesa-Chandler area and $29.9/hr in Phoenix-Mesa-Chandler. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Gilbert and Glendale (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Gilbert and Glendale — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik