Metal Roof Installation cost: Franklin vs Nashville (2026)
In 2026, Franklin and Nashville land on nearly identical metal roof installation pricing — about $21,050 either way.
Franklin TN
Typically around $21,050
Nashville TN
Typically around $21,050
Franklin vs Nashville: full breakdown
| Factor | Franklin | Nashville |
|---|---|---|
| Typical 2026 cost | $21,050 | $21,050 |
| Estimated range | $12,850–$29,250 | $12,850–$29,250 |
| Labor index (vs US) | ×0.97 | ×0.97 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $12,650 | $12,650 |
| Materials/equipment | $8,400 | $8,400 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Franklin vs Nashville
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Franklin | Nashville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,950–$17,650 | $8,950–$17,650 |
| Standing-seam steel | $17,650–$34,100 | $17,650–$34,100 |
| Aluminum | $13,800–$27,350 | $13,800–$27,350 |
| Copper | $29,250–$58,250 | $29,250–$58,250 |
| Zinc | $27,350–$53,450 | $27,350–$53,450 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Franklin vs Nashville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Franklin | Nashville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,750 | $8,000–$15,750 |
| 1,500 sq ft (15 squares) | $10,900–$22,500 | $10,900–$22,500 |
| 2,000 sq ft (20 squares) | $12,850–$29,250 | $12,850–$29,250 |
| 2,500 sq ft (25 squares) | $15,750–$35,050 | $15,750–$35,050 |
| 3,000+ sq ft (30 squares) | $18,650–$40,850 | $18,650–$40,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Franklin vs Nashville
Is metal roof installation cheaper in Franklin or Nashville?
metal roof installation costs about the same in both — roughly $21,050 in each city.
Why does metal roof installation cost more in Nashville than Franklin?
Nashville's higher labor index (0.97 vs 0.97 in Franklin) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Franklin, TN?
Franklin homeowners can expect $12,850 to $29,250 for metal roof installation in 2026, with $21,050 the typical number.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29.4/hr in the Nashville-Davidson--Murfreesboro--Franklin area versus $29.4/hr around Nashville-Davidson--Murfreesboro--Franklin (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Franklin and Nashville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Franklin and Nashville — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik