Metal Roof Installation cost: Fort Lauderdale vs Jacksonville (2026)
The two metros aren't quite in sync on metal roof installation: Fort Lauderdale sits 1% above Jacksonville, or roughly $21,500 versus $21,200 — about $300 apart.
Fort Lauderdale FL
Typically around $21,500
Jacksonville FL
Lower costTypically around $21,200
Fort Lauderdale vs Jacksonville: full breakdown
| Factor | Fort Lauderdale | Jacksonville |
|---|---|---|
| Typical 2026 cost | $21,500 | $21,200 |
| Estimated range | $13,100–$29,850 | $12,950–$29,450 |
| Labor index (vs US) | ×0.96 | ×0.94 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $325 | $275 |
| Labor share | $12,900 | $12,700 |
| Materials/equipment | $8,600 | $8,500 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Fort Lauderdale vs Jacksonville
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Fort Lauderdale | Jacksonville |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,050 | $9,050–$17,800 |
| Standing-seam steel | $18,050–$34,750 | $17,800–$34,350 |
| Aluminum | $14,100–$27,900 | $13,900–$27,500 |
| Copper | $29,850–$59,400 | $29,450–$58,650 |
| Zinc | $27,900–$54,450 | $27,500–$53,800 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Fort Lauderdale vs Jacksonville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Fort Lauderdale | Jacksonville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,050 | $8,050–$15,850 |
| 1,500 sq ft (15 squares) | $11,150–$22,950 | $11,000–$22,650 |
| 2,000 sq ft (20 squares) | $13,100–$29,850 | $12,950–$29,450 |
| 2,500 sq ft (25 squares) | $16,050–$35,750 | $15,850–$35,300 |
| 3,000+ sq ft (30 squares) | $19,050–$41,650 | $18,750–$41,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Jacksonville metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Fort Lauderdale vs Jacksonville
Is metal roof installation cheaper in Fort Lauderdale or Jacksonville?
Jacksonville wins on price: metal roof installation runs about $21,200 there versus $21,500 in Fort Lauderdale, a gap of roughly $300 (1%) as of 2026.
Why does metal roof installation cost more in Fort Lauderdale than Jacksonville?
Fort Lauderdale's higher labor index (0.96 vs 0.94 in Jacksonville) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Fort Lauderdale, FL?
In Fort Lauderdale, metal roof installation typically runs $13,100–$29,850 in 2026, with most homeowners paying around $21,500.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $28.8/hr around Miami-Fort Lauderdale-West Palm Beach versus $28.3/hr near Jacksonville. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Fort Lauderdale and Jacksonville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $300 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Fort Lauderdale can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik