Metal Roof Installation cost: Evansville vs Gary (2026)
In 2026, Evansville and Gary land on nearly identical metal roof installation pricing — about $21,150 either way.
Evansville IN
Typically around $21,150
Gary IN
Typically around $21,150
Evansville vs Gary: full breakdown
| Factor | Evansville | Gary |
|---|---|---|
| Typical 2026 cost | $21,150 | $21,150 |
| Estimated range | $12,900–$29,400 | $12,900–$29,400 |
| Labor index (vs US) | ×0.93 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $250 |
| Labor share | $12,700 | $12,700 |
| Materials/equipment | $8,450 | $8,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Evansville vs Gary
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Evansville | Gary |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,000–$17,750 | $9,000–$17,750 |
| Standing-seam steel | $17,750–$34,250 | $17,750–$34,250 |
| Aluminum | $13,850–$27,450 | $13,850–$27,450 |
| Copper | $29,400–$58,550 | $29,400–$58,550 |
| Zinc | $27,450–$53,650 | $27,450–$53,650 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Evansville vs Gary
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Evansville | Gary |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,800 | $8,000–$15,800 |
| 1,500 sq ft (15 squares) | $10,950–$22,600 | $10,950–$22,600 |
| 2,000 sq ft (20 squares) | $12,900–$29,400 | $12,900–$29,400 |
| 2,500 sq ft (25 squares) | $15,800–$35,200 | $15,800–$35,200 |
| 3,000+ sq ft (30 squares) | $18,700–$41,050 | $18,700–$41,050 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Evansville vs Gary
Is metal roof installation cheaper in Evansville or Gary?
metal roof installation costs about the same in both — roughly $21,150 in each city.
Why does metal roof installation cost more in Gary than Evansville?
It comes down to labor: Gary indexes at 0.93 against Evansville's 0.93. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Evansville, IN?
Expect to pay $12,900 to $29,400 for metal roof installation in Evansville in 2026, averaging around $21,150.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Evansville and Gary (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Evansville and Gary cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik