Metal Roof Installation cost: Evansville vs Fishers (2026)
The two metros aren't quite in sync on metal roof installation: Evansville sits 11% below Fishers, or roughly $21,150 versus $23,450 — about $2,300 apart.
Evansville IN
Lower costTypically around $21,150
Fishers IN
Typically around $23,450
Evansville vs Fishers: full breakdown
| Factor | Evansville | Fishers |
|---|---|---|
| Typical 2026 cost | $21,150 | $23,450 |
| Estimated range | $12,900–$29,400 | $14,300–$32,600 |
| Labor index (vs US) | ×0.93 | ×1.04 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $275 |
| Labor share | $12,700 | $14,050 |
| Materials/equipment | $8,450 | $9,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
11% (about $2,300) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Fishers can close much of that gap.
Metal roof installation by type: Evansville vs Fishers
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Evansville | Fishers |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,000–$17,750 | $10,000–$19,700 |
| Standing-seam steel | $17,750–$34,250 | $19,700–$38,000 |
| Aluminum | $13,850–$27,450 | $15,350–$30,450 |
| Copper | $29,400–$58,550 | $32,600–$64,950 |
| Zinc | $27,450–$53,650 | $30,450–$59,550 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Evansville vs Fishers
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Evansville | Fishers |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,800 | $8,900–$17,500 |
| 1,500 sq ft (15 squares) | $10,950–$22,600 | $12,150–$25,050 |
| 2,000 sq ft (20 squares) | $12,900–$29,400 | $14,300–$32,600 |
| 2,500 sq ft (25 squares) | $15,800–$35,200 | $17,500–$39,100 |
| 3,000+ sq ft (30 squares) | $18,700–$41,050 | $20,750–$45,550 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Evansville; we use Indiana regional price parity instead.
Indianapolis-Carmel-Greenwood metro · about 6% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Evansville vs Fishers
Is metal roof installation cheaper in Evansville or Fishers?
Yes — Fishers costs more. Expect around $23,450 for metal roof installation there against $21,150 in Evansville, about $2,300 (11%) apart in 2026.
Why does metal roof installation cost more in Fishers than Evansville?
Labor rates explain most of it — 1.04 in Fishers vs 0.93 in Evansville. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Evansville, IN?
Expect to pay $12,900 to $29,400 for metal roof installation in Evansville in 2026, averaging around $21,150.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Evansville and Fishers, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not really — the $2,300 gap is one-time, and smart timing and tighter quotes in Fishers can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik