Metal Roof Installation cost: El Dorado Hills vs Fresno (2026)
The two metros aren't quite in sync on metal roof installation: El Dorado Hills sits 2% above Fresno, or roughly $23,200 versus $22,700 — about $500 apart.
El Dorado Hills CA
Typically around $23,200
Fresno CA
Lower costTypically around $22,700
El Dorado Hills vs Fresno: full breakdown
| Factor | El Dorado Hills | Fresno |
|---|---|---|
| Typical 2026 cost | $23,200 | $22,700 |
| Estimated range | $14,150–$32,250 | $13,850–$31,550 |
| Labor index (vs US) | ×1.06 | ×1.04 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $13,900 | $13,600 |
| Materials/equipment | $9,300 | $9,100 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
How much should this gap actually matter?
A 2% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: El Dorado Hills vs Fresno
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | El Dorado Hills | Fresno |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,900–$19,450 | $9,650–$19,050 |
| Standing-seam steel | $19,450–$37,550 | $19,050–$36,750 |
| Aluminum | $15,200–$30,100 | $14,900–$29,450 |
| Copper | $32,250–$64,150 | $31,550–$62,800 |
| Zinc | $30,100–$58,850 | $29,450–$57,600 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: El Dorado Hills vs Fresno
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | El Dorado Hills | Fresno |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,800–$17,350 | $8,650–$16,950 |
| 1,500 sq ft (15 squares) | $12,000–$24,800 | $11,750–$24,250 |
| 2,000 sq ft (20 squares) | $14,150–$32,250 | $13,850–$31,550 |
| 2,500 sq ft (25 squares) | $17,350–$38,600 | $16,950–$37,800 |
| 3,000+ sq ft (30 squares) | $20,500–$45,000 | $20,100–$44,050 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Sacramento-Roseville-Folsom metro · about 11% above the US average installer wage.
Fresno metro · about 7% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
El Dorado Hills vs Fresno
Is metal roof installation cheaper in El Dorado Hills or Fresno?
In 2026, metal roof installation is cheaper in Fresno at about $22,700, versus $23,200 in El Dorado Hills — a difference of about $500 (2%).
Why does metal roof installation cost more in El Dorado Hills than Fresno?
El Dorado Hills's higher labor index (1.06 vs 1.04 in Fresno) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in El Dorado Hills, CA?
Expect to pay $14,150 to $32,250 for metal roof installation in El Dorado Hills in 2026, averaging around $23,200.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $34.5/hr in the Sacramento-Roseville-Folsom area versus $33.3/hr around Fresno (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both El Dorado Hills and Fresno (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $500 difference is real but one-time, and you can often close most of it in El Dorado Hills by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik