Metal Roof Installation cost: Eagan vs Rochester (2026)
Budget-wise, metal roof installation in Eagan ($25,050) runs 16% more than in Rochester ($21,550), a roughly $3,500 spread.
Eagan MN
Typically around $25,050
Rochester MN
Lower costTypically around $21,550
Eagan vs Rochester: full breakdown
| Factor | Eagan | Rochester |
|---|---|---|
| Typical 2026 cost | $25,050 | $21,550 |
| Estimated range | $15,250–$34,850 | $13,100–$29,950 |
| Labor index (vs US) | ×1.11 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,050 | $12,950 |
| Materials/equipment | $10,000 | $8,600 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
That's a real $3,500 difference (16%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Eagan can narrow it.
Metal roof installation by type: Eagan vs Rochester
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Eagan | Rochester |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $9,150–$18,050 |
| Standing-seam steel | $21,000–$40,600 | $18,050–$34,900 |
| Aluminum | $16,400–$32,550 | $14,100–$27,950 |
| Copper | $34,850–$69,350 | $29,950–$59,650 |
| Zinc | $32,550–$63,600 | $27,950–$54,700 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Eagan vs Rochester
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Eagan | Rochester |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $8,150–$16,100 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $11,150–$23,000 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $13,100–$29,950 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $16,100–$35,900 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $19,050–$41,850 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Rochester; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Eagan vs Rochester
Is metal roof installation cheaper in Eagan or Rochester?
Yes — Eagan costs more. Expect around $25,050 for metal roof installation there against $21,550 in Rochester, about $3,500 (16%) apart in 2026.
Why does metal roof installation cost more in Eagan than Rochester?
Eagan's higher labor index (1.11 vs 0.95 in Rochester) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Eagan, MN?
metal roof installation in Eagan runs $15,250–$34,850 as of 2026 — most jobs land near $25,050.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Eagan and Rochester, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $3,500 difference is real but one-time, and you can often close most of it in Eagan by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik