Metal Roof Installation cost: Denver vs Westminster (2026)
In 2026, Denver and Westminster land on nearly identical metal roof installation pricing — about $24,650 either way.
Denver CO
Typically around $24,650
Westminster CO
Typically around $24,650
Denver vs Westminster: full breakdown
| Factor | Denver | Westminster |
|---|---|---|
| Typical 2026 cost | $24,650 | $24,650 |
| Estimated range | $15,000–$34,250 | $15,000–$34,250 |
| Labor index (vs US) | ×1.09 | ×1.09 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $14,800 | $14,800 |
| Materials/equipment | $9,850 | $9,850 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
A wash — choose on quality, not city
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Denver vs Westminster
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Denver | Westminster |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,500–$20,650 | $10,500–$20,650 |
| Standing-seam steel | $20,650–$39,900 | $20,650–$39,900 |
| Aluminum | $16,150–$32,000 | $16,150–$32,000 |
| Copper | $34,250–$68,200 | $34,250–$68,200 |
| Zinc | $32,000–$62,550 | $32,000–$62,550 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Denver vs Westminster
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Denver | Westminster |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,350–$18,400 | $9,350–$18,400 |
| 1,500 sq ft (15 squares) | $12,750–$26,350 | $12,750–$26,350 |
| 2,000 sq ft (20 squares) | $15,000–$34,250 | $15,000–$34,250 |
| 2,500 sq ft (25 squares) | $18,400–$41,050 | $18,400–$41,050 |
| 3,000+ sq ft (30 squares) | $21,800–$47,850 | $21,800–$47,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Denver vs Westminster
Is metal roof installation cheaper in Denver or Westminster?
There's no meaningful difference: metal roof installation runs about $24,650 in both places.
Why does metal roof installation cost more in Westminster than Denver?
Westminster's higher labor index (1.09 vs 1.09 in Denver) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Denver, CO?
Denver homeowners can expect $15,000 to $34,250 for metal roof installation in 2026, with $24,650 the typical number.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $35.7/hr in the Denver-Aurora-Centennial area and $35.7/hr in Denver-Aurora-Centennial. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Denver and Westminster: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Denver and Westminster — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik