Metal Roof Installation cost: Denver vs Northglenn (2026)
Denver and Northglenn are a near-perfect match on metal roof installation cost in 2026, both landing around $24,650.
Denver CO
Typically around $24,650
Northglenn CO
Typically around $24,650
Denver vs Northglenn: full breakdown
| Factor | Denver | Northglenn |
|---|---|---|
| Typical 2026 cost | $24,650 | $24,650 |
| Estimated range | $15,000–$34,250 | $15,000–$34,250 |
| Labor index (vs US) | ×1.09 | ×1.09 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $14,800 | $14,800 |
| Materials/equipment | $9,850 | $9,850 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
No real cost edge either way
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Denver vs Northglenn
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Denver | Northglenn |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,500–$20,650 | $10,500–$20,650 |
| Standing-seam steel | $20,650–$39,900 | $20,650–$39,900 |
| Aluminum | $16,150–$32,000 | $16,150–$32,000 |
| Copper | $34,250–$68,200 | $34,250–$68,200 |
| Zinc | $32,000–$62,550 | $32,000–$62,550 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Denver vs Northglenn
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Denver | Northglenn |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,350–$18,400 | $9,350–$18,400 |
| 1,500 sq ft (15 squares) | $12,750–$26,350 | $12,750–$26,350 |
| 2,000 sq ft (20 squares) | $15,000–$34,250 | $15,000–$34,250 |
| 2,500 sq ft (25 squares) | $18,400–$41,050 | $18,400–$41,050 |
| 3,000+ sq ft (30 squares) | $21,800–$47,850 | $21,800–$47,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Denver vs Northglenn
Is metal roof installation cheaper in Denver or Northglenn?
There's no meaningful difference: metal roof installation runs about $24,650 in both places.
Why does metal roof installation cost more in Northglenn than Denver?
The main driver is local labor rates: Northglenn's labor index is 1.09 versus 1.09 in Denver. Climate zone (cold vs cold) also shift the total.
How much is metal roof installation in Denver, CO?
In Denver, metal roof installation typically runs $15,000–$34,250 in 2026, with most homeowners paying around $24,650.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $35.7/hr around Denver-Aurora-Centennial versus $35.7/hr near Denver-Aurora-Centennial. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Denver and Northglenn: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Denver and Northglenn cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik