Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Denver vs Greeley (2026)

Budget-wise, metal roof installation in Denver ($24,650) runs 12% more than in Greeley ($22,000), a roughly $2,650 spread.

Denver CO

$15,000 $34,250

Typically around $24,650

Greeley CO

Lower cost
$13,400 $30,550

Typically around $22,000

Expect to pay roughly $2,650 (12%) more for metal roof installation in Denver than in Greeley — local labor is the main reason.
Side by side

Denver vs Greeley: full breakdown

FactorDenverGreeley
Typical 2026 cost$24,650$22,000
Estimated range$15,000–$34,250$13,400–$30,550
Labor index (vs US)×1.09×0.97
Climate zoneColdCold
Climate factor×1.04×1.04
Local permit$300$275
Labor share$14,800$13,200
Materials/equipment$9,850$8,800

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

The verdict

Is the price difference a dealbreaker?

A 12% spread (roughly $2,650) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Denver typically recover some of it.

By type

Metal roof installation by type: Denver vs Greeley

Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeDenverGreeley
Corrugated steel (exposed fastener)$10,500$20,650$9,350$18,450
Standing-seam steel$20,650$39,900$18,450$35,600
Aluminum$16,150$32,000$14,400$28,500
Copper$34,250$68,200$30,550$60,800
Zinc$32,000$62,550$28,500$55,750

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

By size

Metal roof installation by roof size: Denver vs Greeley

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeDenverGreeley
1,000 sq ft (10 squares)$9,350$18,400$8,350$16,400
1,500 sq ft (15 squares)$12,750$26,350$11,350$23,500
2,000 sq ft (20 squares)$15,000$34,250$13,400$30,550
2,500 sq ft (25 squares)$18,400$41,050$16,400$36,600
3,000+ sq ft (30 squares)$21,800$47,850$19,450$42,650

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

Local labor reality

What roofing pros earn in each metro

Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.

Denver, CO
$35.7/hr

Denver-Aurora-Centennial metro · about 15% above the US average installer wage.

Greeley, CO
Modeled from state data

No BLS metro wage series for Greeley; we use Colorado regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Denver vs Greeley

Is metal roof installation cheaper in Denver or Greeley?

Greeley wins on price: metal roof installation runs about $22,000 there versus $24,650 in Denver, a gap of roughly $2,650 (12%) as of 2026.

Why does metal roof installation cost more in Denver than Greeley?

Denver's higher labor index (1.09 vs 0.97 in Greeley) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.

How much is metal roof installation in Denver, CO?

In Denver, metal roof installation typically runs $15,000–$34,250 in 2026, with most homeowners paying around $24,650.

When is the cheapest time to buy metal roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Denver and Greeley, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on metal roof installation cost?

Not really — the $2,650 gap is one-time, and smart timing and tighter quotes in Denver can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik