Metal Roof Installation cost: Coon Rapids vs Duluth (2026)
Budget-wise, metal roof installation in Coon Rapids ($25,050) runs 18% more than in Duluth ($21,150), a roughly $3,900 spread.
Coon Rapids MN
Typically around $25,050
Duluth MN
Lower costTypically around $21,150
Coon Rapids vs Duluth: full breakdown
| Factor | Coon Rapids | Duluth |
|---|---|---|
| Typical 2026 cost | $25,050 | $21,150 |
| Estimated range | $15,250–$34,850 | $12,900–$29,400 |
| Labor index (vs US) | ×1.11 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,050 | $12,700 |
| Materials/equipment | $10,000 | $8,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the gap worth worrying about?
That's a real $3,900 difference (18%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Coon Rapids can narrow it.
Metal roof installation by type: Coon Rapids vs Duluth
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Coon Rapids | Duluth |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $9,000–$17,750 |
| Standing-seam steel | $21,000–$40,600 | $17,750–$34,250 |
| Aluminum | $16,400–$32,550 | $13,850–$27,450 |
| Copper | $34,850–$69,350 | $29,400–$58,550 |
| Zinc | $32,550–$63,600 | $27,450–$53,650 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Coon Rapids vs Duluth
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Coon Rapids | Duluth |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $8,000–$15,800 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $10,950–$22,600 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $12,900–$29,400 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $15,800–$35,200 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $18,700–$41,050 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Duluth; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Coon Rapids vs Duluth
Is metal roof installation cheaper in Coon Rapids or Duluth?
In 2026, metal roof installation is cheaper in Duluth at about $21,150, versus $25,050 in Coon Rapids — a difference of about $3,900 (18%).
Why does metal roof installation cost more in Coon Rapids than Duluth?
It comes down to labor: Coon Rapids indexes at 1.11 against Duluth's 0.93. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Coon Rapids, MN?
Coon Rapids homeowners can expect $15,250 to $34,850 for metal roof installation in 2026, with $25,050 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Coon Rapids and Duluth: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $3,900 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Coon Rapids can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik