Metal Roof Installation cost: Carrollwood Village vs Jacksonville (2026)
Budget-wise, metal roof installation in Carrollwood Village ($20,600) runs 3% less than in Jacksonville ($21,200), a roughly $600 spread.
Carrollwood Village FL
Lower costTypically around $20,600
Jacksonville FL
Typically around $21,200
Carrollwood Village vs Jacksonville: full breakdown
| Factor | Carrollwood Village | Jacksonville |
|---|---|---|
| Typical 2026 cost | $20,600 | $21,200 |
| Estimated range | $12,550–$28,650 | $12,950–$29,450 |
| Labor index (vs US) | ×0.92 | ×0.94 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,350 | $12,700 |
| Materials/equipment | $8,250 | $8,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
3% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Carrollwood Village vs Jacksonville
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Carrollwood Village | Jacksonville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,800–$17,300 | $9,050–$17,800 |
| Standing-seam steel | $17,300–$33,400 | $17,800–$34,350 |
| Aluminum | $13,500–$26,750 | $13,900–$27,500 |
| Copper | $28,650–$57,050 | $29,450–$58,650 |
| Zinc | $26,750–$52,300 | $27,500–$53,800 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Carrollwood Village vs Jacksonville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Carrollwood Village | Jacksonville |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,850–$15,400 | $8,050–$15,850 |
| 1,500 sq ft (15 squares) | $10,700–$22,050 | $11,000–$22,650 |
| 2,000 sq ft (20 squares) | $12,550–$28,650 | $12,950–$29,450 |
| 2,500 sq ft (25 squares) | $15,400–$34,350 | $15,850–$35,300 |
| 3,000+ sq ft (30 squares) | $18,250–$40,000 | $18,750–$41,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Tampa-St. Petersburg-Clearwater metro · about 14% below the US average installer wage.
Jacksonville metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Carrollwood Village vs Jacksonville
Is metal roof installation cheaper in Carrollwood Village or Jacksonville?
Yes — Jacksonville costs more. Expect around $21,200 for metal roof installation there against $20,600 in Carrollwood Village, about $600 (3%) apart in 2026.
Why does metal roof installation cost more in Jacksonville than Carrollwood Village?
It comes down to labor: Jacksonville indexes at 0.94 against Carrollwood Village's 0.92. The hot-vs-hot climate difference adds to the gap.
How much is metal roof installation in Carrollwood Village, FL?
Expect to pay $12,550 to $28,650 for metal roof installation in Carrollwood Village in 2026, averaging around $20,600.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $26.9/hr around Tampa-St. Petersburg-Clearwater versus $28.3/hr near Jacksonville. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Carrollwood Village and Jacksonville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $600 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Jacksonville can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik