Metal Roof Installation cost: Burien vs Tacoma (2026)
There's essentially no price gap here: metal roof installation runs close to $25,950 in both Burien and Tacoma in 2026.
Burien WA
Typically around $25,950
Tacoma WA
Typically around $25,950
Burien vs Tacoma: full breakdown
| Factor | Burien | Tacoma |
|---|---|---|
| Typical 2026 cost | $25,950 | $25,950 |
| Estimated range | $15,800–$36,050 | $15,800–$36,050 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $15,550 | $15,550 |
| Materials/equipment | $10,400 | $10,400 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
A wash — choose on quality, not city
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Burien vs Tacoma
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Burien | Tacoma |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $11,050–$21,750 |
| Standing-seam steel | $21,750–$42,000 | $21,750–$42,000 |
| Aluminum | $17,000–$33,700 | $17,000–$33,700 |
| Copper | $36,050–$71,800 | $36,050–$71,800 |
| Zinc | $33,700–$65,850 | $33,700–$65,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Burien vs Tacoma
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Burien | Tacoma |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $9,850–$19,400 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $13,450–$27,750 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $15,800–$36,050 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $19,400–$43,200 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $22,950–$50,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Burien vs Tacoma
Is metal roof installation cheaper in Burien or Tacoma?
metal roof installation costs about the same in both — roughly $25,950 in each city.
Why does metal roof installation cost more in Tacoma than Burien?
Tacoma's higher labor index (1.19 vs 1.19 in Burien) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Burien, WA?
In Burien, metal roof installation typically runs $15,800–$36,050 in 2026, with most homeowners paying around $25,950.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $41.1/hr around Seattle-Tacoma-Bellevue versus $41.1/hr near Seattle-Tacoma-Bellevue. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Burien and Tacoma: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Burien and Tacoma — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik