Metal Roof Installation cost: Brooklyn vs Morris Heights (2026)
Metal roof installation costs about the same in Brooklyn and Morris Heights in 2026 — roughly $25,800 in each.
Brooklyn NY
Typically around $25,800
Morris Heights NY
Typically around $25,800
Brooklyn vs Morris Heights: full breakdown
| Factor | Brooklyn | Morris Heights |
|---|---|---|
| Typical 2026 cost | $25,800 | $25,800 |
| Estimated range | $15,700–$35,850 | $15,700–$35,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,300 | $10,300 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
No real cost edge either way
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Brooklyn vs Morris Heights
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Brooklyn | Morris Heights |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,750 | $21,650–$41,750 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,850–$71,350 | $35,850–$71,350 |
| Zinc | $33,500–$65,450 | $33,500–$65,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Brooklyn vs Morris Heights
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brooklyn | Morris Heights |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,250 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $13,350–$27,550 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $15,700–$35,850 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $19,250–$42,950 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $22,800–$50,050 | $22,800–$50,050 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Brooklyn vs Morris Heights
Is metal roof installation cheaper in Brooklyn or Morris Heights?
Not really — both cities land at almost the same number for metal roof installation, around $25,800 each.
Why does metal roof installation cost more in Morris Heights than Brooklyn?
Morris Heights's higher labor index (1.14 vs 1.14 in Brooklyn) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Brooklyn, NY?
In Brooklyn, metal roof installation typically runs $15,700–$35,850 in 2026, with most homeowners paying around $25,800.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $38.3/hr in the New York-Newark-Jersey City area and $38.3/hr in New York-Newark-Jersey City. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Brooklyn and Morris Heights (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Brooklyn and Morris Heights — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik