Metal Roof Installation cost: Brooklyn vs Cypress Hills (2026)
In 2026, Brooklyn and Cypress Hills land on nearly identical metal roof installation pricing — about $25,800 either way.
Brooklyn NY
Typically around $25,800
Cypress Hills NY
Typically around $25,800
Brooklyn vs Cypress Hills: full breakdown
| Factor | Brooklyn | Cypress Hills |
|---|---|---|
| Typical 2026 cost | $25,800 | $25,800 |
| Estimated range | $15,700–$35,850 | $15,700–$35,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,300 | $10,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
No real cost edge either way
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Brooklyn vs Cypress Hills
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Brooklyn | Cypress Hills |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,750 | $21,650–$41,750 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,850–$71,350 | $35,850–$71,350 |
| Zinc | $33,500–$65,450 | $33,500–$65,450 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Brooklyn vs Cypress Hills
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brooklyn | Cypress Hills |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,250 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $13,350–$27,550 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $15,700–$35,850 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $19,250–$42,950 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $22,800–$50,050 | $22,800–$50,050 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Brooklyn vs Cypress Hills
Is metal roof installation cheaper in Brooklyn or Cypress Hills?
There's no meaningful difference: metal roof installation runs about $25,800 in both places.
Why does metal roof installation cost more in Cypress Hills than Brooklyn?
Labor rates explain most of it — 1.14 in Cypress Hills vs 1.14 in Brooklyn. A cold climate versus cold accounts for the rest.
How much is metal roof installation in Brooklyn, NY?
Expect to pay $15,700 to $35,850 for metal roof installation in Brooklyn in 2026, averaging around $25,800.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.3/hr around New York-Newark-Jersey City versus $38.3/hr near New York-Newark-Jersey City. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Brooklyn and Cypress Hills (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Brooklyn and Cypress Hills. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik