Metal Roof Installation cost: Brentwood vs New York (2026)
Brentwood and New York are a near-perfect match on metal roof installation cost in 2026, both landing around $25,800.
Brentwood NY
Typically around $25,800
New York NY
Typically around $25,800
Brentwood vs New York: full breakdown
| Factor | Brentwood | New York |
|---|---|---|
| Typical 2026 cost | $25,800 | $25,800 |
| Estimated range | $15,700–$35,850 | $15,700–$35,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,300 | $10,300 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Brentwood vs New York
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Brentwood | New York |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,750 | $21,650–$41,750 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,850–$71,350 | $35,850–$71,350 |
| Zinc | $33,500–$65,450 | $33,500–$65,450 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Brentwood vs New York
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brentwood | New York |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,250 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $13,350–$27,550 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $15,700–$35,850 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $19,250–$42,950 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $22,800–$50,050 | $22,800–$50,050 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Brentwood vs New York
Is metal roof installation cheaper in Brentwood or New York?
There's no meaningful difference: metal roof installation runs about $25,800 in both places.
Why does metal roof installation cost more in New York than Brentwood?
New York's higher labor index (1.14 vs 1.14 in Brentwood) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Brentwood, NY?
In Brentwood, metal roof installation typically runs $15,700–$35,850 in 2026, with most homeowners paying around $25,800.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $38.3/hr in the New York-Newark-Jersey City area versus $38.3/hr around New York-Newark-Jersey City (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Brentwood and New York: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Brentwood and New York — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik