Metal Roof Installation cost: Boston vs Weymouth Town (2026)
Boston and Weymouth Town are a near-perfect match on metal roof installation cost in 2026, both landing around $25,850.
Boston MA
Typically around $25,850
Weymouth Town MA
Typically around $25,850
Boston vs Weymouth Town: full breakdown
| Factor | Boston | Weymouth Town |
|---|---|---|
| Typical 2026 cost | $25,850 | $25,850 |
| Estimated range | $15,750–$35,900 | $15,750–$35,900 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,350 | $10,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
No real cost edge either way
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Boston vs Weymouth Town
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Boston | Weymouth Town |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,800 | $21,650–$41,800 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,900–$71,450 | $35,900–$71,450 |
| Zinc | $33,500–$65,500 | $33,500–$65,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Boston vs Weymouth Town
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Boston | Weymouth Town |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,300 | $9,800–$19,300 |
| 1,500 sq ft (15 squares) | $13,350–$27,600 | $13,350–$27,600 |
| 2,000 sq ft (20 squares) | $15,750–$35,900 | $15,750–$35,900 |
| 2,500 sq ft (25 squares) | $19,300–$43,000 | $19,300–$43,000 |
| 3,000+ sq ft (30 squares) | $22,850–$50,100 | $22,850–$50,100 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Boston vs Weymouth Town
Is metal roof installation cheaper in Boston or Weymouth Town?
Not really — both cities land at almost the same number for metal roof installation, around $25,850 each.
Why does metal roof installation cost more in Weymouth Town than Boston?
It comes down to labor: Weymouth Town indexes at 1.14 against Boston's 1.14. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Boston, MA?
Expect to pay $15,750 to $35,900 for metal roof installation in Boston in 2026, averaging around $25,850.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $38.4/hr in the Boston-Cambridge-Newton area and $38.4/hr in Boston-Cambridge-Newton. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Boston and Weymouth Town: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Boston and Weymouth Town — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik