Metal Roof Installation cost: Boston vs Revere (2026)
Metal roof installation costs about the same in Boston and Revere in 2026 — roughly $25,850 in each.
Boston MA
Typically around $25,850
Revere MA
Typically around $25,850
Boston vs Revere: full breakdown
| Factor | Boston | Revere |
|---|---|---|
| Typical 2026 cost | $25,850 | $25,850 |
| Estimated range | $15,750–$35,900 | $15,750–$35,900 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,350 | $10,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Boston vs Revere
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Boston | Revere |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,800 | $21,650–$41,800 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,900–$71,450 | $35,900–$71,450 |
| Zinc | $33,500–$65,500 | $33,500–$65,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Boston vs Revere
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Boston | Revere |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,300 | $9,800–$19,300 |
| 1,500 sq ft (15 squares) | $13,350–$27,600 | $13,350–$27,600 |
| 2,000 sq ft (20 squares) | $15,750–$35,900 | $15,750–$35,900 |
| 2,500 sq ft (25 squares) | $19,300–$43,000 | $19,300–$43,000 |
| 3,000+ sq ft (30 squares) | $22,850–$50,100 | $22,850–$50,100 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Boston vs Revere
Is metal roof installation cheaper in Boston or Revere?
There's no meaningful difference: metal roof installation runs about $25,850 in both places.
Why does metal roof installation cost more in Revere than Boston?
Labor rates explain most of it — 1.14 in Revere vs 1.14 in Boston. A cold climate versus cold accounts for the rest.
How much is metal roof installation in Boston, MA?
Expect to pay $15,750 to $35,900 for metal roof installation in Boston in 2026, averaging around $25,850.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $38.4/hr in the Boston-Cambridge-Newton area versus $38.4/hr around Boston-Cambridge-Newton (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Boston and Revere: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Boston and Revere cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik