Metal Roof Installation cost: Boston vs Medford (2026)
Boston and Medford are a near-perfect match on metal roof installation cost in 2026, both landing around $25,850.
Boston MA
Typically around $25,850
Medford MA
Typically around $25,850
Boston vs Medford: full breakdown
| Factor | Boston | Medford |
|---|---|---|
| Typical 2026 cost | $25,850 | $25,850 |
| Estimated range | $15,750–$35,900 | $15,750–$35,900 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,350 | $10,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
No real cost edge either way
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Boston vs Medford
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Boston | Medford |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,800 | $21,650–$41,800 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,900–$71,450 | $35,900–$71,450 |
| Zinc | $33,500–$65,500 | $33,500–$65,500 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Boston vs Medford
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Boston | Medford |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,300 | $9,800–$19,300 |
| 1,500 sq ft (15 squares) | $13,350–$27,600 | $13,350–$27,600 |
| 2,000 sq ft (20 squares) | $15,750–$35,900 | $15,750–$35,900 |
| 2,500 sq ft (25 squares) | $19,300–$43,000 | $19,300–$43,000 |
| 3,000+ sq ft (30 squares) | $22,850–$50,100 | $22,850–$50,100 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Boston vs Medford
Is metal roof installation cheaper in Boston or Medford?
metal roof installation costs about the same in both — roughly $25,850 in each city.
Why does metal roof installation cost more in Medford than Boston?
It comes down to labor: Medford indexes at 1.14 against Boston's 1.14. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Boston, MA?
Expect to pay $15,750 to $35,900 for metal roof installation in Boston in 2026, averaging around $25,850.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.4/hr around Boston-Cambridge-Newton versus $38.4/hr near Boston-Cambridge-Newton. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Boston and Medford, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Boston and Medford — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik