Metal Roof Installation cost: Boston vs Everett (2026)
Boston and Everett are a near-perfect match on metal roof installation cost in 2026, both landing around $25,850.
Boston MA
Typically around $25,850
Everett MA
Typically around $25,850
Boston vs Everett: full breakdown
| Factor | Boston | Everett |
|---|---|---|
| Typical 2026 cost | $25,850 | $25,850 |
| Estimated range | $15,750–$35,900 | $15,750–$35,900 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,350 | $10,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Boston vs Everett
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Boston | Everett |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,800 | $21,650–$41,800 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,900–$71,450 | $35,900–$71,450 |
| Zinc | $33,500–$65,500 | $33,500–$65,500 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Boston vs Everett
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Boston | Everett |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,300 | $9,800–$19,300 |
| 1,500 sq ft (15 squares) | $13,350–$27,600 | $13,350–$27,600 |
| 2,000 sq ft (20 squares) | $15,750–$35,900 | $15,750–$35,900 |
| 2,500 sq ft (25 squares) | $19,300–$43,000 | $19,300–$43,000 |
| 3,000+ sq ft (30 squares) | $22,850–$50,100 | $22,850–$50,100 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Boston vs Everett
Is metal roof installation cheaper in Boston or Everett?
metal roof installation costs about the same in both — roughly $25,850 in each city.
Why does metal roof installation cost more in Everett than Boston?
It comes down to labor: Everett indexes at 1.14 against Boston's 1.14. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Boston, MA?
In Boston, metal roof installation typically runs $15,750–$35,900 in 2026, with most homeowners paying around $25,850.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $38.4/hr in Boston-Cambridge-Newton compared with $38.4/hr in Boston-Cambridge-Newton (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Boston and Everett: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Boston and Everett. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik