Metal Roof Installation cost: Bloomington vs Evansville (2026)
Bloomington runs 3% higher than Evansville for metal roof installation — expect around $21,700 in Bloomington against $21,150 in Evansville, a difference of about $550.
Bloomington IN
Typically around $21,700
Evansville IN
Lower costTypically around $21,150
Bloomington vs Evansville: full breakdown
| Factor | Bloomington | Evansville |
|---|---|---|
| Typical 2026 cost | $21,700 | $21,150 |
| Estimated range | $13,200–$30,150 | $12,900–$29,400 |
| Labor index (vs US) | ×0.96 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $250 |
| Labor share | $13,000 | $12,700 |
| Materials/equipment | $8,700 | $8,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the price difference a dealbreaker?
That 3% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Bloomington vs Evansville
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Bloomington | Evansville |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,200 | $9,000–$17,750 |
| Standing-seam steel | $18,200–$35,100 | $17,750–$34,250 |
| Aluminum | $14,200–$28,150 | $13,850–$27,450 |
| Copper | $30,150–$60,050 | $29,400–$58,550 |
| Zinc | $28,150–$55,050 | $27,450–$53,650 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Bloomington vs Evansville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bloomington | Evansville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,200 | $8,000–$15,800 |
| 1,500 sq ft (15 squares) | $11,200–$23,150 | $10,950–$22,600 |
| 2,000 sq ft (20 squares) | $13,200–$30,150 | $12,900–$29,400 |
| 2,500 sq ft (25 squares) | $16,200–$36,100 | $15,800–$35,200 |
| 3,000+ sq ft (30 squares) | $19,200–$42,100 | $18,700–$41,050 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Bloomington vs Evansville
Is metal roof installation cheaper in Bloomington or Evansville?
Evansville comes out ahead here, at roughly $21,150 for metal roof installation compared with $21,700 in Bloomington — a 3% ($550) gap as of 2026.
Why does metal roof installation cost more in Bloomington than Evansville?
It comes down to labor: Bloomington indexes at 0.96 against Evansville's 0.93. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Bloomington, IN?
In Bloomington, metal roof installation typically runs $13,200–$30,150 in 2026, with most homeowners paying around $21,700.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Bloomington and Evansville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $550 is a real gap, but it's a one-time cost you can partly offset in Bloomington with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik