Metal Roof Installation cost: Bloomfield vs Newark (2026)
There's essentially no price gap here: metal roof installation runs close to $24,850 in both Bloomfield and Newark in 2026.
Bloomfield NJ
Typically around $24,850
Newark NJ
Typically around $24,850
Bloomfield vs Newark: full breakdown
| Factor | Bloomfield | Newark |
|---|---|---|
| Typical 2026 cost | $24,850 | $24,850 |
| Estimated range | $15,150–$34,500 | $15,150–$34,500 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,900 | $14,900 |
| Materials/equipment | $9,950 | $9,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
A wash — choose on quality, not city
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Bloomfield vs Newark
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bloomfield | Newark |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,550–$20,800 | $10,550–$20,800 |
| Standing-seam steel | $20,800–$40,200 | $20,800–$40,200 |
| Aluminum | $16,250–$32,200 | $16,250–$32,200 |
| Copper | $34,500–$68,650 | $34,500–$68,650 |
| Zinc | $32,200–$62,950 | $32,200–$62,950 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Bloomfield vs Newark
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bloomfield | Newark |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,450–$18,550 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $12,850–$26,500 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $15,150–$34,500 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $18,550–$41,300 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $21,950–$48,150 | $21,950–$48,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Bloomfield vs Newark
Is metal roof installation cheaper in Bloomfield or Newark?
Not really — both cities land at almost the same number for metal roof installation, around $24,850 each.
Why does metal roof installation cost more in Newark than Bloomfield?
It comes down to labor: Newark indexes at 1.14 against Bloomfield's 1.14. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Bloomfield, NJ?
Expect to pay $15,150 to $34,500 for metal roof installation in Bloomfield in 2026, averaging around $24,850.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $38.3/hr in the New York-Newark-Jersey City area versus $38.3/hr around New York-Newark-Jersey City (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Bloomfield and Newark: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Bloomfield and Newark — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik