Metal Roof Installation cost: Billerica vs Springfield (2026)
Budget-wise, metal roof installation in Billerica ($25,850) runs 15% more than in Springfield ($22,500), a roughly $3,350 spread.
Billerica MA
Typically around $25,850
Springfield MA
Lower costTypically around $22,500
Billerica vs Springfield: full breakdown
| Factor | Billerica | Springfield |
|---|---|---|
| Typical 2026 cost | $25,850 | $22,500 |
| Estimated range | $15,750–$35,900 | $13,700–$31,300 |
| Labor index (vs US) | ×1.14 | ×0.99 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $275 |
| Labor share | $15,500 | $13,500 |
| Materials/equipment | $10,350 | $9,000 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
15% (about $3,350) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Billerica can close much of that gap.
Metal roof installation by type: Billerica vs Springfield
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Billerica | Springfield |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $9,600–$18,900 |
| Standing-seam steel | $21,650–$41,800 | $18,900–$36,450 |
| Aluminum | $16,900–$33,500 | $14,750–$29,200 |
| Copper | $35,900–$71,450 | $31,300–$62,300 |
| Zinc | $33,500–$65,500 | $29,200–$57,150 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Billerica vs Springfield
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Billerica | Springfield |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,300 | $8,550–$16,800 |
| 1,500 sq ft (15 squares) | $13,350–$27,600 | $11,650–$24,050 |
| 2,000 sq ft (20 squares) | $15,750–$35,900 | $13,700–$31,300 |
| 2,500 sq ft (25 squares) | $19,300–$43,000 | $16,800–$37,500 |
| 3,000+ sq ft (30 squares) | $22,850–$50,100 | $19,900–$43,700 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
No BLS metro wage series for Springfield; we use Massachusetts regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Billerica vs Springfield
Is metal roof installation cheaper in Billerica or Springfield?
Yes — Billerica costs more. Expect around $25,850 for metal roof installation there against $22,500 in Springfield, about $3,350 (15%) apart in 2026.
Why does metal roof installation cost more in Billerica than Springfield?
It comes down to labor: Billerica indexes at 1.14 against Springfield's 0.99. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Billerica, MA?
In Billerica, metal roof installation typically runs $15,750–$35,900 in 2026, with most homeowners paying around $25,850.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Billerica and Springfield: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $3,350 is a real gap, but it's a one-time cost you can partly offset in Billerica with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik