Metal Roof Installation cost: Beverly Cove vs Worcester (2026)
Budget-wise, metal roof installation in Beverly Cove ($25,850) runs 11% more than in Worcester ($23,350), a roughly $2,500 spread.
Beverly Cove MA
Typically around $25,850
Worcester MA
Lower costTypically around $23,350
Beverly Cove vs Worcester: full breakdown
| Factor | Beverly Cove | Worcester |
|---|---|---|
| Typical 2026 cost | $25,850 | $23,350 |
| Estimated range | $15,750–$35,900 | $14,250–$32,450 |
| Labor index (vs US) | ×1.14 | ×1.03 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $300 |
| Labor share | $15,500 | $14,000 |
| Materials/equipment | $10,350 | $9,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
11% (about $2,500) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Beverly Cove can close much of that gap.
Metal roof installation by type: Beverly Cove vs Worcester
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Beverly Cove | Worcester |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $9,950–$19,600 |
| Standing-seam steel | $21,650–$41,800 | $19,600–$37,800 |
| Aluminum | $16,900–$33,500 | $15,300–$30,300 |
| Copper | $35,900–$71,450 | $32,450–$64,550 |
| Zinc | $33,500–$65,500 | $30,300–$59,200 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Beverly Cove vs Worcester
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Beverly Cove | Worcester |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,300 | $8,850–$17,450 |
| 1,500 sq ft (15 squares) | $13,350–$27,600 | $12,100–$24,950 |
| 2,000 sq ft (20 squares) | $15,750–$35,900 | $14,250–$32,450 |
| 2,500 sq ft (25 squares) | $19,300–$43,000 | $17,450–$38,850 |
| 3,000+ sq ft (30 squares) | $22,850–$50,100 | $20,650–$45,300 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
No BLS metro wage series for Worcester; we use Massachusetts regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Beverly Cove vs Worcester
Is metal roof installation cheaper in Beverly Cove or Worcester?
Yes — Beverly Cove costs more. Expect around $25,850 for metal roof installation there against $23,350 in Worcester, about $2,500 (11%) apart in 2026.
Why does metal roof installation cost more in Beverly Cove than Worcester?
It comes down to labor: Beverly Cove indexes at 1.14 against Worcester's 1.03. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Beverly Cove, MA?
Expect to pay $15,750 to $35,900 for metal roof installation in Beverly Cove in 2026, averaging around $25,850.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Beverly Cove and Worcester: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,500 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Beverly Cove can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik