Metal Roof Installation cost: Berwyn vs Rockford (2026)
The two metros aren't quite in sync on metal roof installation: Berwyn sits 20% above Rockford, or roughly $25,700 versus $21,400 — about $4,300 apart.
Berwyn IL
Typically around $25,700
Rockford IL
Lower costTypically around $21,400
Berwyn vs Rockford: full breakdown
| Factor | Berwyn | Rockford |
|---|---|---|
| Typical 2026 cost | $25,700 | $21,400 |
| Estimated range | $15,650–$35,700 | $13,050–$29,750 |
| Labor index (vs US) | ×1.14 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,400 | $12,850 |
| Materials/equipment | $10,300 | $8,550 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the price difference a dealbreaker?
A 20% spread (roughly $4,300) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Berwyn typically recover some of it.
Metal roof installation by type: Berwyn vs Rockford
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Berwyn | Rockford |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,900–$21,550 | $9,100–$17,950 |
| Standing-seam steel | $21,550–$41,600 | $17,950–$34,700 |
| Aluminum | $16,850–$33,350 | $14,000–$27,800 |
| Copper | $35,700–$71,100 | $29,750–$59,300 |
| Zinc | $33,350–$65,200 | $27,800–$54,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Berwyn vs Rockford
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Berwyn | Rockford |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,750–$19,200 | $8,100–$16,000 |
| 1,500 sq ft (15 squares) | $13,300–$27,450 | $11,050–$22,900 |
| 2,000 sq ft (20 squares) | $15,650–$35,700 | $13,050–$29,750 |
| 2,500 sq ft (25 squares) | $19,200–$42,800 | $16,000–$35,650 |
| 3,000+ sq ft (30 squares) | $22,750–$49,900 | $18,950–$41,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
No BLS metro wage series for Rockford; we use Illinois regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Berwyn vs Rockford
Is metal roof installation cheaper in Berwyn or Rockford?
Rockford wins on price: metal roof installation runs about $21,400 there versus $25,700 in Berwyn, a gap of roughly $4,300 (20%) as of 2026.
Why does metal roof installation cost more in Berwyn than Rockford?
The main driver is local labor rates: Berwyn's labor index is 1.14 versus 0.95 in Rockford. Climate zone (cold vs cold) and permit fees also shift the total.
How much is metal roof installation in Berwyn, IL?
metal roof installation in Berwyn runs $15,650–$35,700 as of 2026 — most jobs land near $25,700.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Berwyn and Rockford, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $4,300 difference is real but one-time, and you can often close most of it in Berwyn by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik