Metal Roof Installation cost: Bentonville vs Springdale (2026)
Bentonville and Springdale are a near-perfect match on metal roof installation cost in 2026, both landing around $20,600.
Bentonville AR
Typically around $20,600
Springdale AR
Typically around $20,600
Bentonville vs Springdale: full breakdown
| Factor | Bentonville | Springdale |
|---|---|---|
| Typical 2026 cost | $20,600 | $20,600 |
| Estimated range | $12,550–$28,650 | $12,550–$28,650 |
| Labor index (vs US) | ×0.95 | ×0.95 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,350 | $12,350 |
| Materials/equipment | $8,250 | $8,250 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Basically a tie — focus on the contractor
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Bentonville vs Springdale
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bentonville | Springdale |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,750–$17,300 | $8,750–$17,300 |
| Standing-seam steel | $17,300–$33,350 | $17,300–$33,350 |
| Aluminum | $13,500–$26,750 | $13,500–$26,750 |
| Copper | $28,650–$57,000 | $28,650–$57,000 |
| Zinc | $26,750–$52,300 | $26,750–$52,300 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Bentonville vs Springdale
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bentonville | Springdale |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,400 | $7,800–$15,400 |
| 1,500 sq ft (15 squares) | $10,650–$22,000 | $10,650–$22,000 |
| 2,000 sq ft (20 squares) | $12,550–$28,650 | $12,550–$28,650 |
| 2,500 sq ft (25 squares) | $15,400–$34,300 | $15,400–$34,300 |
| 3,000+ sq ft (30 squares) | $18,200–$40,000 | $18,200–$40,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Bentonville vs Springdale
Is metal roof installation cheaper in Bentonville or Springdale?
There's no meaningful difference: metal roof installation runs about $20,600 in both places.
Why does metal roof installation cost more in Springdale than Bentonville?
Springdale's higher labor index (0.95 vs 0.95 in Bentonville) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Bentonville, AR?
In Bentonville, metal roof installation typically runs $12,550–$28,650 in 2026, with most homeowners paying around $20,600.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bentonville and Springdale, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Bentonville and Springdale — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik