Metal Roof Installation cost: Bensonhurst vs Queens (2026)
Bensonhurst and Queens are a near-perfect match on metal roof installation cost in 2026, both landing around $25,800.
Bensonhurst NY
Typically around $25,800
Queens NY
Typically around $25,800
Bensonhurst vs Queens: full breakdown
| Factor | Bensonhurst | Queens |
|---|---|---|
| Typical 2026 cost | $25,800 | $25,800 |
| Estimated range | $15,700–$35,850 | $15,700–$35,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,300 | $10,300 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Bensonhurst vs Queens
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Bensonhurst | Queens |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,750 | $21,650–$41,750 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,850–$71,350 | $35,850–$71,350 |
| Zinc | $33,500–$65,450 | $33,500–$65,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Bensonhurst vs Queens
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bensonhurst | Queens |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,250 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $13,350–$27,550 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $15,700–$35,850 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $19,250–$42,950 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $22,800–$50,050 | $22,800–$50,050 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Bensonhurst vs Queens
Is metal roof installation cheaper in Bensonhurst or Queens?
metal roof installation costs about the same in both — roughly $25,800 in each city.
Why does metal roof installation cost more in Queens than Bensonhurst?
It comes down to labor: Queens indexes at 1.14 against Bensonhurst's 1.14. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Bensonhurst, NY?
Bensonhurst homeowners can expect $15,700 to $35,850 for metal roof installation in 2026, with $25,800 the typical number.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $38.3/hr in the New York-Newark-Jersey City area and $38.3/hr in New York-Newark-Jersey City. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Bensonhurst and Queens: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Bensonhurst and Queens. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik