Metal Roof Installation cost: Beloit vs Madison (2026)
The two metros aren't quite in sync on metal roof installation: Beloit sits 3% below Madison, or roughly $21,550 versus $22,100 — about $550 apart.
Beloit WI
Lower costTypically around $21,550
Madison WI
Typically around $22,100
Beloit vs Madison: full breakdown
| Factor | Beloit | Madison |
|---|---|---|
| Typical 2026 cost | $21,550 | $22,100 |
| Estimated range | $13,100–$29,950 | $13,450–$30,750 |
| Labor index (vs US) | ×0.95 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $275 |
| Labor share | $12,950 | $13,250 |
| Materials/equipment | $8,600 | $8,850 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
That 3% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Beloit vs Madison
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Beloit | Madison |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,150–$18,050 | $9,400–$18,550 |
| Standing-seam steel | $18,050–$34,900 | $18,550–$35,800 |
| Aluminum | $14,100–$27,950 | $14,500–$28,700 |
| Copper | $29,950–$59,650 | $30,750–$61,200 |
| Zinc | $27,950–$54,700 | $28,700–$56,100 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Beloit vs Madison
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Beloit | Madison |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,150–$16,100 | $8,400–$16,500 |
| 1,500 sq ft (15 squares) | $11,150–$23,000 | $11,450–$23,600 |
| 2,000 sq ft (20 squares) | $13,100–$29,950 | $13,450–$30,750 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $16,500–$36,800 |
| 3,000+ sq ft (30 squares) | $19,050–$41,850 | $19,550–$42,900 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Beloit vs Madison
Is metal roof installation cheaper in Beloit or Madison?
Beloit wins on price: metal roof installation runs about $21,550 there versus $22,100 in Madison, a gap of roughly $550 (3%) as of 2026.
Why does metal roof installation cost more in Madison than Beloit?
Labor rates explain most of it — 0.98 in Madison vs 0.95 in Beloit. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Beloit, WI?
metal roof installation in Beloit runs $13,100–$29,950 as of 2026 — most jobs land near $21,550.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Beloit and Madison (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $550 difference is real but one-time, and you can often close most of it in Madison by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik