Metal Roof Installation cost: Bellevue vs Lincoln (2026)
In 2026, Bellevue and Lincoln land on nearly identical metal roof installation pricing — about $21,550 either way.
Bellevue NE
Typically around $21,550
Lincoln NE
Typically around $21,550
Bellevue vs Lincoln: full breakdown
| Factor | Bellevue | Lincoln |
|---|---|---|
| Typical 2026 cost | $21,550 | $21,550 |
| Estimated range | $13,100–$29,950 | $13,100–$29,950 |
| Labor index (vs US) | ×0.95 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $250 |
| Labor share | $12,950 | $12,950 |
| Materials/equipment | $8,600 | $8,600 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Bellevue vs Lincoln
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Bellevue | Lincoln |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,150–$18,050 | $9,150–$18,050 |
| Standing-seam steel | $18,050–$34,900 | $18,050–$34,900 |
| Aluminum | $14,100–$27,950 | $14,100–$27,950 |
| Copper | $29,950–$59,650 | $29,950–$59,650 |
| Zinc | $27,950–$54,700 | $27,950–$54,700 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Bellevue vs Lincoln
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bellevue | Lincoln |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,150–$16,100 | $8,150–$16,100 |
| 1,500 sq ft (15 squares) | $11,150–$23,000 | $11,150–$23,000 |
| 2,000 sq ft (20 squares) | $13,100–$29,950 | $13,100–$29,950 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $16,100–$35,900 |
| 3,000+ sq ft (30 squares) | $19,050–$41,850 | $19,050–$41,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Bellevue vs Lincoln
Is metal roof installation cheaper in Bellevue or Lincoln?
Practically identical — expect around $21,550 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Lincoln than Bellevue?
Lincoln's higher labor index (0.95 vs 0.95 in Bellevue) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Bellevue, NE?
In Bellevue, metal roof installation typically runs $13,100–$29,950 in 2026, with most homeowners paying around $21,550.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bellevue and Lincoln, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Bellevue and Lincoln — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik