Metal Roof Installation cost: Bartlett vs Clarksville (2026)
Bartlett runs 1% higher than Clarksville for metal roof installation — expect around $20,850 in Bartlett against $20,600 in Clarksville, a difference of about $250.
Bartlett TN
Typically around $20,850
Clarksville TN
Lower costTypically around $20,600
Bartlett vs Clarksville: full breakdown
| Factor | Bartlett | Clarksville |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,600 |
| Estimated range | $12,700–$29,000 | $12,550–$28,650 |
| Labor index (vs US) | ×0.96 | ×0.95 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,350 |
| Materials/equipment | $8,350 | $8,250 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the gap worth worrying about?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Bartlett vs Clarksville
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bartlett | Clarksville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,900–$17,500 | $8,750–$17,300 |
| Standing-seam steel | $17,500–$33,800 | $17,300–$33,350 |
| Aluminum | $13,650–$27,100 | $13,500–$26,750 |
| Copper | $29,000–$57,750 | $28,650–$57,000 |
| Zinc | $27,100–$52,950 | $26,750–$52,300 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Bartlett vs Clarksville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bartlett | Clarksville |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,600 | $7,800–$15,400 |
| 1,500 sq ft (15 squares) | $10,800–$22,300 | $10,650–$22,000 |
| 2,000 sq ft (20 squares) | $12,700–$29,000 | $12,550–$28,650 |
| 2,500 sq ft (25 squares) | $15,600–$34,750 | $15,400–$34,300 |
| 3,000+ sq ft (30 squares) | $18,450–$40,500 | $18,200–$40,000 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Memphis metro · about 7% below the US average installer wage.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Bartlett vs Clarksville
Is metal roof installation cheaper in Bartlett or Clarksville?
Yes — Bartlett costs more. Expect around $20,850 for metal roof installation there against $20,600 in Clarksville, about $250 (1%) apart in 2026.
Why does metal roof installation cost more in Bartlett than Clarksville?
Bartlett's higher labor index (0.96 vs 0.95 in Clarksville) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Bartlett, TN?
Bartlett homeowners can expect $12,700 to $29,000 for metal roof installation in 2026, with $20,850 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bartlett and Clarksville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $250 difference is real but one-time, and you can often close most of it in Bartlett by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik