Metal Roof Installation cost: Attleboro vs Cambridge (2026)
Metal roof installation costs about the same in Attleboro and Cambridge in 2026 — roughly $25,850 in each.
Attleboro MA
Typically around $25,850
Cambridge MA
Typically around $25,850
Attleboro vs Cambridge: full breakdown
| Factor | Attleboro | Cambridge |
|---|---|---|
| Typical 2026 cost | $25,850 | $25,850 |
| Estimated range | $15,750–$35,900 | $15,750–$35,900 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,350 | $10,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Attleboro vs Cambridge
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Attleboro | Cambridge |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,800 | $21,650–$41,800 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,900–$71,450 | $35,900–$71,450 |
| Zinc | $33,500–$65,500 | $33,500–$65,500 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Attleboro vs Cambridge
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Attleboro | Cambridge |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,300 | $9,800–$19,300 |
| 1,500 sq ft (15 squares) | $13,350–$27,600 | $13,350–$27,600 |
| 2,000 sq ft (20 squares) | $15,750–$35,900 | $15,750–$35,900 |
| 2,500 sq ft (25 squares) | $19,300–$43,000 | $19,300–$43,000 |
| 3,000+ sq ft (30 squares) | $22,850–$50,100 | $22,850–$50,100 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Attleboro vs Cambridge
Is metal roof installation cheaper in Attleboro or Cambridge?
metal roof installation costs about the same in both — roughly $25,850 in each city.
Why does metal roof installation cost more in Cambridge than Attleboro?
Labor rates explain most of it — 1.14 in Cambridge vs 1.14 in Attleboro. A cold climate versus cold accounts for the rest.
How much is metal roof installation in Attleboro, MA?
Attleboro homeowners can expect $15,750 to $35,900 for metal roof installation in 2026, with $25,850 the typical number.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $38.4/hr in Boston-Cambridge-Newton compared with $38.4/hr in Boston-Cambridge-Newton (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Attleboro and Cambridge: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Attleboro and Cambridge cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik