Metal Roof Installation cost: Arlington vs Tuckahoe (2026)
Arlington runs 10% higher than Tuckahoe for metal roof installation — expect around $23,600 in Arlington against $21,500 in Tuckahoe, a difference of about $2,100.
Arlington VA
Typically around $23,600
Tuckahoe VA
Lower costTypically around $21,500
Arlington vs Tuckahoe: full breakdown
| Factor | Arlington | Tuckahoe |
|---|---|---|
| Typical 2026 cost | $23,600 | $21,500 |
| Estimated range | $14,400–$32,800 | $13,100–$29,900 |
| Labor index (vs US) | ×1.08 | ×0.99 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $275 |
| Labor share | $14,150 | $12,900 |
| Materials/equipment | $9,450 | $8,600 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
10% (about $2,100) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Arlington can close much of that gap.
Metal roof installation by type: Arlington vs Tuckahoe
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Arlington | Tuckahoe |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,050–$19,800 | $9,150–$18,050 |
| Standing-seam steel | $19,800–$38,200 | $18,050–$34,850 |
| Aluminum | $15,450–$30,600 | $14,100–$27,950 |
| Copper | $32,800–$65,250 | $29,900–$59,550 |
| Zinc | $30,600–$59,850 | $27,950–$54,600 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Arlington vs Tuckahoe
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Arlington | Tuckahoe |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,950–$17,600 | $8,200–$16,100 |
| 1,500 sq ft (15 squares) | $12,200–$25,200 | $11,150–$23,000 |
| 2,000 sq ft (20 squares) | $14,400–$32,800 | $13,100–$29,900 |
| 2,500 sq ft (25 squares) | $17,600–$39,300 | $16,100–$35,850 |
| 3,000+ sq ft (30 squares) | $20,850–$45,800 | $19,050–$41,750 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Washington-Arlington-Alexandria metro · about 14% above the US average installer wage.
No BLS metro wage series for Tuckahoe; we use Virginia regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Arlington vs Tuckahoe
Is metal roof installation cheaper in Arlington or Tuckahoe?
Tuckahoe comes out ahead here, at roughly $21,500 for metal roof installation compared with $23,600 in Arlington — a 10% ($2,100) gap as of 2026.
Why does metal roof installation cost more in Arlington than Tuckahoe?
Labor rates explain most of it — 1.08 in Arlington vs 0.99 in Tuckahoe. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Arlington, VA?
Arlington homeowners can expect $14,400 to $32,800 for metal roof installation in 2026, with $23,600 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Arlington and Tuckahoe (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $2,100 difference is real but one-time, and you can often close most of it in Arlington by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik