Metal Roof Installation cost: Arlington vs Centreville (2026)
Arlington and Centreville are a near-perfect match on metal roof installation cost in 2026, both landing around $23,600.
Arlington VA
Typically around $23,600
Centreville VA
Typically around $23,600
Arlington vs Centreville: full breakdown
| Factor | Arlington | Centreville |
|---|---|---|
| Typical 2026 cost | $23,600 | $23,600 |
| Estimated range | $14,400–$32,800 | $14,400–$32,800 |
| Labor index (vs US) | ×1.08 | ×1.08 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,150 | $14,150 |
| Materials/equipment | $9,450 | $9,450 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
A wash — choose on quality, not city
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Arlington vs Centreville
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Arlington | Centreville |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,050–$19,800 | $10,050–$19,800 |
| Standing-seam steel | $19,800–$38,200 | $19,800–$38,200 |
| Aluminum | $15,450–$30,600 | $15,450–$30,600 |
| Copper | $32,800–$65,250 | $32,800–$65,250 |
| Zinc | $30,600–$59,850 | $30,600–$59,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Arlington vs Centreville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Arlington | Centreville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,950–$17,600 | $8,950–$17,600 |
| 1,500 sq ft (15 squares) | $12,200–$25,200 | $12,200–$25,200 |
| 2,000 sq ft (20 squares) | $14,400–$32,800 | $14,400–$32,800 |
| 2,500 sq ft (25 squares) | $17,600–$39,300 | $17,600–$39,300 |
| 3,000+ sq ft (30 squares) | $20,850–$45,800 | $20,850–$45,800 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Washington-Arlington-Alexandria metro · about 14% above the US average installer wage.
Washington-Arlington-Alexandria metro · about 14% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Arlington vs Centreville
Is metal roof installation cheaper in Arlington or Centreville?
Not really — both cities land at almost the same number for metal roof installation, around $23,600 each.
Why does metal roof installation cost more in Centreville than Arlington?
It comes down to labor: Centreville indexes at 1.08 against Arlington's 1.08. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Arlington, VA?
Expect to pay $14,400 to $32,800 for metal roof installation in Arlington in 2026, averaging around $23,600.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $35.4/hr around Washington-Arlington-Alexandria versus $35.4/hr near Washington-Arlington-Alexandria. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Arlington and Centreville: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Arlington and Centreville — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik