Metal Roof Installation cost: Apache Junction vs Glendale (2026)
Apache Junction and Glendale are a near-perfect match on metal roof installation cost in 2026, both landing around $21,950.
Apache Junction AZ
Typically around $21,950
Glendale AZ
Typically around $21,950
Apache Junction vs Glendale: full breakdown
| Factor | Apache Junction | Glendale |
|---|---|---|
| Typical 2026 cost | $21,950 | $21,950 |
| Estimated range | $13,400–$30,500 | $13,400–$30,500 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $13,150 | $13,150 |
| Materials/equipment | $8,800 | $8,800 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Apache Junction vs Glendale
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Apache Junction | Glendale |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,350–$18,400 | $9,350–$18,400 |
| Standing-seam steel | $18,400–$35,500 | $18,400–$35,500 |
| Aluminum | $14,400–$28,450 | $14,400–$28,450 |
| Copper | $30,500–$60,650 | $30,500–$60,650 |
| Zinc | $28,450–$55,600 | $28,450–$55,600 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Apache Junction vs Glendale
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Apache Junction | Glendale |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,350–$16,400 | $8,350–$16,400 |
| 1,500 sq ft (15 squares) | $11,350–$23,450 | $11,350–$23,450 |
| 2,000 sq ft (20 squares) | $13,400–$30,500 | $13,400–$30,500 |
| 2,500 sq ft (25 squares) | $16,400–$36,500 | $16,400–$36,500 |
| 3,000+ sq ft (30 squares) | $19,400–$42,550 | $19,400–$42,550 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Phoenix-Mesa-Chandler metro · about 4% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Apache Junction vs Glendale
Is metal roof installation cheaper in Apache Junction or Glendale?
Practically identical — expect around $21,950 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Glendale than Apache Junction?
The main driver is local labor rates: Glendale's labor index is 0.98 versus 0.98 in Apache Junction. Climate zone (hot vs hot) also shift the total.
How much is metal roof installation in Apache Junction, AZ?
Apache Junction homeowners can expect $13,400 to $30,500 for metal roof installation in 2026, with $21,950 the typical number.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29.9/hr in the Phoenix-Mesa-Chandler area versus $29.9/hr around Phoenix-Mesa-Chandler (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Apache Junction and Glendale: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Apache Junction and Glendale — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik