Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Ankeny vs Davenport (2026)

Budget-wise, metal roof installation in Ankeny ($21,550) runs 2% more than in Davenport ($21,150), a roughly $400 spread.

Ankeny IA

$13,100 $29,950

Typically around $21,550

Davenport IA

Lower cost
$12,900 $29,400

Typically around $21,150

Expect to pay roughly $400 (2%) more for metal roof installation in Ankeny than in Davenport — local labor is the main reason.
Side by side

Ankeny vs Davenport: full breakdown

FactorAnkenyDavenport
Typical 2026 cost$21,550$21,150
Estimated range$13,100–$29,950$12,900–$29,400
Labor index (vs US)×0.95×0.93
Climate zoneColdCold
Climate factor×1.04×1.04
Local permit$250$250
Labor share$12,950$12,700
Materials/equipment$8,600$8,450

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

The verdict

Is the price difference a dealbreaker?

2% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Metal roof installation by type: Ankeny vs Davenport

Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypeAnkenyDavenport
Corrugated steel (exposed fastener)$9,150$18,050$9,000$17,750
Standing-seam steel$18,050$34,900$17,750$34,250
Aluminum$14,100$27,950$13,850$27,450
Copper$29,950$59,650$29,400$58,550
Zinc$27,950$54,700$27,450$53,650

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Metal roof installation by roof size: Ankeny vs Davenport

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeAnkenyDavenport
1,000 sq ft (10 squares)$8,150$16,100$8,000$15,800
1,500 sq ft (15 squares)$11,150$23,000$10,950$22,600
2,000 sq ft (20 squares)$13,100$29,950$12,900$29,400
2,500 sq ft (25 squares)$16,100$35,900$15,800$35,200
3,000+ sq ft (30 squares)$19,050$41,850$18,700$41,050

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

Best time to buy

Cheapest time for metal roof installation in either city

Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The risk case

The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

Our take

Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.

FAQ

Ankeny vs Davenport

Is metal roof installation cheaper in Ankeny or Davenport?

Davenport wins on price: metal roof installation runs about $21,150 there versus $21,550 in Ankeny, a gap of roughly $400 (2%) as of 2026.

Why does metal roof installation cost more in Ankeny than Davenport?

It comes down to labor: Ankeny indexes at 0.95 against Davenport's 0.93. The cold-vs-cold climate difference adds to the gap.

How much is metal roof installation in Ankeny, IA?

Ankeny homeowners can expect $13,100 to $29,950 for metal roof installation in 2026, with $21,550 the typical number.

When is the cheapest time to buy metal roof installation — and does it differ by city?

No, the seasonal pattern is the same in Ankeny and Davenport: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on metal roof installation cost?

Not really — the $400 gap is one-time, and smart timing and tighter quotes in Ankeny can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik