Metal Roof Installation cost: Anderson vs Evansville (2026)
Budget-wise, metal roof installation in Anderson ($21,000) runs 1% less than in Evansville ($21,150), a roughly $150 spread.
Anderson IN
Lower costTypically around $21,000
Evansville IN
Typically around $21,150
Anderson vs Evansville: full breakdown
| Factor | Anderson | Evansville |
|---|---|---|
| Typical 2026 cost | $21,000 | $21,150 |
| Estimated range | $12,800–$29,200 | $12,900–$29,400 |
| Labor index (vs US) | ×0.93 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $250 |
| Labor share | $12,600 | $12,700 |
| Materials/equipment | $8,400 | $8,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
How much should this gap actually matter?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Anderson vs Evansville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Anderson | Evansville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,950–$17,600 | $9,000–$17,750 |
| Standing-seam steel | $17,600–$34,050 | $17,750–$34,250 |
| Aluminum | $13,750–$27,250 | $13,850–$27,450 |
| Copper | $29,200–$58,150 | $29,400–$58,550 |
| Zinc | $27,250–$53,350 | $27,450–$53,650 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Anderson vs Evansville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Anderson | Evansville |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,950–$15,700 | $8,000–$15,800 |
| 1,500 sq ft (15 squares) | $10,850–$22,450 | $10,950–$22,600 |
| 2,000 sq ft (20 squares) | $12,800–$29,200 | $12,900–$29,400 |
| 2,500 sq ft (25 squares) | $15,700–$35,000 | $15,800–$35,200 |
| 3,000+ sq ft (30 squares) | $18,600–$40,800 | $18,700–$41,050 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Anderson vs Evansville
Is metal roof installation cheaper in Anderson or Evansville?
Anderson wins on price: metal roof installation runs about $21,000 there versus $21,150 in Evansville, a gap of roughly $150 (1%) as of 2026.
Why does metal roof installation cost more in Evansville than Anderson?
It comes down to labor: Evansville indexes at 0.93 against Anderson's 0.93. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Anderson, IN?
Expect to pay $12,800 to $29,200 for metal roof installation in Anderson in 2026, averaging around $21,000.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Anderson and Evansville: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $150 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Evansville can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik