Metal Roof Installation cost: Amarillo vs Fort Worth (2026)
Amarillo runs 2% lower than Fort Worth for metal roof installation — expect around $21,350 in Amarillo against $21,850 in Fort Worth, a difference of about $500.
Amarillo TX
Lower costTypically around $21,350
Fort Worth TX
Typically around $21,850
Amarillo vs Fort Worth: full breakdown
| Factor | Amarillo | Fort Worth |
|---|---|---|
| Typical 2026 cost | $21,350 | $21,850 |
| Estimated range | $13,000–$29,650 | $13,300–$30,350 |
| Labor index (vs US) | ×0.95 | ×0.97 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $250 | $300 |
| Labor share | $12,800 | $13,100 |
| Materials/equipment | $8,550 | $8,750 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
A 2% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Amarillo vs Fort Worth
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Amarillo | Fort Worth |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,100–$17,900 | $9,300–$18,300 |
| Standing-seam steel | $17,900–$34,550 | $18,300–$35,350 |
| Aluminum | $14,000–$27,700 | $14,300–$28,350 |
| Copper | $29,650–$59,100 | $30,350–$60,350 |
| Zinc | $27,700–$54,200 | $28,350–$55,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Amarillo vs Fort Worth
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Amarillo | Fort Worth |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,100–$15,950 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $11,050–$22,800 | $11,300–$23,300 |
| 2,000 sq ft (20 squares) | $13,000–$29,650 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $15,950–$35,550 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $18,900–$41,450 | $19,300–$42,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Amarillo; we use Texas regional price parity instead.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Amarillo vs Fort Worth
Is metal roof installation cheaper in Amarillo or Fort Worth?
Amarillo comes out ahead here, at roughly $21,350 for metal roof installation compared with $21,850 in Fort Worth — a 2% ($500) gap as of 2026.
Why does metal roof installation cost more in Fort Worth than Amarillo?
Fort Worth's higher labor index (0.97 vs 0.95 in Amarillo) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Amarillo, TX?
Amarillo homeowners can expect $13,000 to $29,650 for metal roof installation in 2026, with $21,350 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Amarillo and Fort Worth: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $500 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Fort Worth can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik