Metal Roof Installation cost: Aloha vs Gresham (2026)
Aloha and Gresham are a near-perfect match on metal roof installation cost in 2026, both landing around $23,400.
Aloha OR
Typically around $23,400
Gresham OR
Typically around $23,400
Aloha vs Gresham: full breakdown
| Factor | Aloha | Gresham |
|---|---|---|
| Typical 2026 cost | $23,400 | $23,400 |
| Estimated range | $14,250–$32,500 | $14,250–$32,500 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,050 | $14,050 |
| Materials/equipment | $9,350 | $9,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Aloha vs Gresham
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Aloha | Gresham |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,950–$19,600 | $9,950–$19,600 |
| Standing-seam steel | $19,600–$37,850 | $19,600–$37,850 |
| Aluminum | $15,300–$30,350 | $15,300–$30,350 |
| Copper | $32,500–$64,700 | $32,500–$64,700 |
| Zinc | $30,350–$59,350 | $30,350–$59,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Aloha vs Gresham
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Aloha | Gresham |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,450 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $12,100–$25,000 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $14,250–$32,500 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $17,450–$38,950 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $20,700–$45,350 | $20,700–$45,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Aloha vs Gresham
Is metal roof installation cheaper in Aloha or Gresham?
There's no meaningful difference: metal roof installation runs about $23,400 in both places.
Why does metal roof installation cost more in Gresham than Aloha?
Gresham's higher labor index (1.07 vs 1.07 in Aloha) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Aloha, OR?
In Aloha, metal roof installation typically runs $14,250–$32,500 in 2026, with most homeowners paying around $23,400.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $34.9/hr in the Portland-Vancouver-Hillsboro area and $34.9/hr in Portland-Vancouver-Hillsboro. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Aloha and Gresham: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Aloha and Gresham. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik