Metal Roof Installation cost: Albuquerque vs Enchanted Hills (2026)
In 2026, Albuquerque and Enchanted Hills land on nearly identical metal roof installation pricing — about $20,200 either way.
Albuquerque NM
Typically around $20,200
Enchanted Hills NM
Typically around $20,200
Albuquerque vs Enchanted Hills: full breakdown
| Factor | Albuquerque | Enchanted Hills |
|---|---|---|
| Typical 2026 cost | $20,200 | $20,200 |
| Estimated range | $12,300–$28,050 | $12,300–$28,050 |
| Labor index (vs US) | ×0.93 | ×0.93 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,100 | $12,100 |
| Materials/equipment | $8,100 | $8,100 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Albuquerque vs Enchanted Hills
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Albuquerque | Enchanted Hills |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,600–$16,900 | $8,600–$16,900 |
| Standing-seam steel | $16,900–$32,650 | $16,900–$32,650 |
| Aluminum | $13,200–$26,200 | $13,200–$26,200 |
| Copper | $28,050–$55,800 | $28,050–$55,800 |
| Zinc | $26,200–$51,200 | $26,200–$51,200 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Albuquerque vs Enchanted Hills
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Albuquerque | Enchanted Hills |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,650–$15,050 | $7,650–$15,050 |
| 1,500 sq ft (15 squares) | $10,450–$21,550 | $10,450–$21,550 |
| 2,000 sq ft (20 squares) | $12,300–$28,050 | $12,300–$28,050 |
| 2,500 sq ft (25 squares) | $15,050–$33,600 | $15,050–$33,600 |
| 3,000+ sq ft (30 squares) | $17,850–$39,150 | $17,850–$39,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Albuquerque metro · about 12% below the US average installer wage.
Albuquerque metro · about 12% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Albuquerque vs Enchanted Hills
Is metal roof installation cheaper in Albuquerque or Enchanted Hills?
metal roof installation costs about the same in both — roughly $20,200 in each city.
Why does metal roof installation cost more in Enchanted Hills than Albuquerque?
The main driver is local labor rates: Enchanted Hills's labor index is 0.93 versus 0.93 in Albuquerque. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Albuquerque, NM?
Albuquerque homeowners can expect $12,300 to $28,050 for metal roof installation in 2026, with $20,200 the typical number.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $27.3/hr in the Albuquerque area versus $27.3/hr around Albuquerque (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Albuquerque and Enchanted Hills, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Albuquerque and Enchanted Hills — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik