Metal Roof Installation cost: Albany Park vs Naperville (2026)
Metal roof installation costs about the same in Albany Park and Naperville in 2026 — roughly $25,700 in each.
Albany Park IL
Typically around $25,700
Naperville IL
Typically around $25,700
Albany Park vs Naperville: full breakdown
| Factor | Albany Park | Naperville |
|---|---|---|
| Typical 2026 cost | $25,700 | $25,700 |
| Estimated range | $15,650–$35,700 | $15,650–$35,700 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $15,400 | $15,400 |
| Materials/equipment | $10,300 | $10,300 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
No real cost edge either way
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Albany Park vs Naperville
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Albany Park | Naperville |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,900–$21,550 | $10,900–$21,550 |
| Standing-seam steel | $21,550–$41,600 | $21,550–$41,600 |
| Aluminum | $16,850–$33,350 | $16,850–$33,350 |
| Copper | $35,700–$71,100 | $35,700–$71,100 |
| Zinc | $33,350–$65,200 | $33,350–$65,200 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Albany Park vs Naperville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Albany Park | Naperville |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,750–$19,200 | $9,750–$19,200 |
| 1,500 sq ft (15 squares) | $13,300–$27,450 | $13,300–$27,450 |
| 2,000 sq ft (20 squares) | $15,650–$35,700 | $15,650–$35,700 |
| 2,500 sq ft (25 squares) | $19,200–$42,800 | $19,200–$42,800 |
| 3,000+ sq ft (30 squares) | $22,750–$49,900 | $22,750–$49,900 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Albany Park vs Naperville
Is metal roof installation cheaper in Albany Park or Naperville?
Practically identical — expect around $25,700 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Naperville than Albany Park?
Labor rates explain most of it — 1.14 in Naperville vs 1.14 in Albany Park. A cold climate versus cold accounts for the rest.
How much is metal roof installation in Albany Park, IL?
Expect to pay $15,650 to $35,700 for metal roof installation in Albany Park in 2026, averaging around $25,700.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $38.1/hr in the Chicago-Naperville-Elgin area versus $38.1/hr around Chicago-Naperville-Elgin (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Albany Park and Naperville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Albany Park and Naperville — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik