Metal Roof Installation cost: Albany vs Gresham (2026)
Albany runs 4% lower than Gresham for metal roof installation — expect around $22,450 in Albany against $23,400 in Gresham, a difference of about $950.
Albany OR
Lower costTypically around $22,450
Gresham OR
Typically around $23,400
Albany vs Gresham: full breakdown
| Factor | Albany | Gresham |
|---|---|---|
| Typical 2026 cost | $22,450 | $23,400 |
| Estimated range | $13,700–$31,200 | $14,250–$32,500 |
| Labor index (vs US) | ×1.03 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $13,450 | $14,050 |
| Materials/equipment | $9,000 | $9,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
How much should this gap actually matter?
That 4% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Albany vs Gresham
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Albany | Gresham |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,550–$18,850 | $9,950–$19,600 |
| Standing-seam steel | $18,850–$36,350 | $19,600–$37,850 |
| Aluminum | $14,700–$29,150 | $15,300–$30,350 |
| Copper | $31,200–$62,100 | $32,500–$64,700 |
| Zinc | $29,150–$56,950 | $30,350–$59,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Albany vs Gresham
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Albany | Gresham |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,550–$16,800 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $11,650–$24,000 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $13,700–$31,200 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $16,800–$37,400 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $19,850–$43,550 | $20,700–$45,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Albany; we use Oregon regional price parity instead.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Albany vs Gresham
Is metal roof installation cheaper in Albany or Gresham?
In 2026, metal roof installation is cheaper in Albany at about $22,450, versus $23,400 in Gresham — a difference of about $950 (4%).
Why does metal roof installation cost more in Gresham than Albany?
It comes down to labor: Gresham indexes at 1.07 against Albany's 1.03. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Albany, OR?
Expect to pay $13,700 to $31,200 for metal roof installation in Albany in 2026, averaging around $22,450.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Albany and Gresham: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $950 is a real gap, but it's a one-time cost you can partly offset in Gresham with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik