Metal Roof Installation cost: Akron vs Cleveland Heights (2026)
The two metros aren't quite in sync on metal roof installation: Akron sits 1% below Cleveland Heights, or roughly $21,550 versus $21,700 — about $150 apart.
Akron OH
Lower costTypically around $21,550
Cleveland Heights OH
Typically around $21,700
Akron vs Cleveland Heights: full breakdown
| Factor | Akron | Cleveland Heights |
|---|---|---|
| Typical 2026 cost | $21,550 | $21,700 |
| Estimated range | $13,100–$29,950 | $13,200–$30,150 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $250 |
| Labor share | $12,950 | $13,000 |
| Materials/equipment | $8,600 | $8,700 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
How much should this gap actually matter?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Akron vs Cleveland Heights
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Akron | Cleveland Heights |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,150–$18,050 | $9,200–$18,200 |
| Standing-seam steel | $18,050–$34,900 | $18,200–$35,100 |
| Aluminum | $14,100–$27,950 | $14,200–$28,150 |
| Copper | $29,950–$59,650 | $30,150–$60,050 |
| Zinc | $27,950–$54,700 | $28,150–$55,050 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Akron vs Cleveland Heights
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Akron | Cleveland Heights |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,150–$16,100 | $8,200–$16,200 |
| 1,500 sq ft (15 squares) | $11,150–$23,000 | $11,200–$23,150 |
| 2,000 sq ft (20 squares) | $13,100–$29,950 | $13,200–$30,150 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $16,200–$36,100 |
| 3,000+ sq ft (30 squares) | $19,050–$41,850 | $19,200–$42,100 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Akron vs Cleveland Heights
Is metal roof installation cheaper in Akron or Cleveland Heights?
Akron wins on price: metal roof installation runs about $21,550 there versus $21,700 in Cleveland Heights, a gap of roughly $150 (1%) as of 2026.
Why does metal roof installation cost more in Cleveland Heights than Akron?
It comes down to labor: Cleveland Heights indexes at 0.96 against Akron's 0.95. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Akron, OH?
In Akron, metal roof installation typically runs $13,100–$29,950 in 2026, with most homeowners paying around $21,550.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Akron and Cleveland Heights: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $150 is a real gap, but it's a one-time cost you can partly offset in Cleveland Heights with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik