Heat Pump Water Heater Installation cost: Clarksville vs Collierville (2026)
Clarksville runs 3% lower than Collierville for heat pump water heater installation — expect around $3,300 in Clarksville against $3,400 in Collierville, a difference of about $100.
Clarksville TN
Lower costTypically around $3,300
Collierville TN
Typically around $3,400
Clarksville vs Collierville: full breakdown
| Factor | Clarksville | Collierville |
|---|---|---|
| Typical 2026 cost | $3,300 | $3,400 |
| Estimated range | $2,300–$4,300 | $2,350–$4,400 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $125 | $150 |
| Labor share | $1,800 | $1,850 |
| Materials/equipment | $1,500 | $1,550 |
All figures are 2026 localized planning estimates for heat pump water heater installation — get an actual quote before you commit.
Is the gap worth worrying about?
At 3%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for heat pump water heater installation — focus on the contractor, not the city.
Heat pump water heater installation by type: Clarksville vs Collierville
Every heat pump water heater installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Clarksville | Collierville |
|---|---|---|
| 40–50 gallon | $2,300–$3,750 | $2,350–$3,800 |
| 65–66 gallon | $2,800–$4,100 | $2,850–$4,200 |
| 80 gallon | $3,250–$4,800 | $3,300–$4,850 |
Heat pump water heater installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Heat pump water heater installation by tank capacity: Clarksville vs Collierville
Hybrid heat pump water heaters use a storage tank, so they're sized in gallons by household — but because they recover heat efficiently, a 50-gallon hybrid often serves a home that needed a 65–80 gallon electric tank.
| Size | Clarksville | Collierville |
|---|---|---|
| 40 gal (1–2 people) | $2,100–$3,550 | $2,150–$3,600 |
| 50 gal (2–4 people) | $2,300–$3,950 | $2,350–$4,000 |
| 65 gal (4–5 people) | $2,700–$4,100 | $2,750–$4,200 |
| 80 gal (5+ people) | $3,000–$4,300 | $3,050–$4,400 |
Treat these as 2026 localized estimates for heat pump water heater installation, not quotes from a contractor.
What water heaters pros earn in each metro
Roughly 55% of what you pay for heat pump water heater installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for heat pump water heater installation in either city
Tanks fail most in winter when incoming water is cold and demand is high — emergency-rate territory. Replacing a 10+ year-old unit proactively in a slow month avoids the premium.
Tank or tankless — and what should you budget?
What a water heater costs to install and what it costs to run rarely move together, and the format is the lever between them. Tank, tankless, and heat-pump each strike that balance differently.
The simple-swap case
If your current tank suits your household and the budget is tight, a like-for-like tank replacement is the cheapest, fastest job — no gas-line or panel upgrades, done in a morning.
The heat-pump case
For the lowest running cost of the three, the heat-pump water heater wins outright, and where utilities offer incentives the rebates behind it are the richest available. You pay for that advantage up front, and the unit needs the right home — a warm, well-ventilated area with real clearance. Wedge it into a tight closet and the savings disappear.
The tankless case
Tankless costs more upfront and may need a gas-line or electrical upgrade, but it lasts longer, never runs out of hot water and trims standby energy loss — strongest for larger households planning to stay put.
Match the format to your household and how long you'll stay. Tank for tight budgets, tankless for endless hot water, heat-pump for the lowest running cost and biggest rebates.
Clarksville vs Collierville
Is heat pump water heater installation cheaper in Clarksville or Collierville?
In 2026, heat pump water heater installation is cheaper in Clarksville at about $3,300, versus $3,400 in Collierville — a difference of about $100 (3%).
Why does heat pump water heater installation cost more in Collierville than Clarksville?
Labor rates explain most of it — 0.96 in Collierville vs 0.95 in Clarksville. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is heat pump water heater installation in Clarksville, TN?
heat pump water heater installation in Clarksville runs $2,300–$4,300 as of 2026 — most jobs land near $3,300.
When is the cheapest time to buy heat pump water heater installation — and does it differ by city?
It doesn't vary by location — Spring and early fall is the discount window in both Clarksville and Collierville (roughly 5–10% off), while deep winter (failure season) tends to be the most expensive in either city.
Should I choose where to live based on heat pump water heater installation cost?
Not really — the $100 gap is one-time, and smart timing and tighter quotes in Collierville can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare heat pump water heater installation in other cities
Updated June 2026 · By Serhat Özçelik