Heat Pump Water Heater Installation cost: Cheyenne vs Gillette (2026)
Cheyenne runs 5% higher than Gillette for heat pump water heater installation — expect around $3,450 in Cheyenne against $3,300 in Gillette, a difference of about $150.
Cheyenne WY
Typically around $3,450
Gillette WY
Lower costTypically around $3,300
Cheyenne vs Gillette: full breakdown
| Factor | Cheyenne | Gillette |
|---|---|---|
| Typical 2026 cost | $3,450 | $3,300 |
| Estimated range | $2,400–$4,500 | $2,300–$4,300 |
| Labor index (vs US) | ×0.97 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.02 | ×1.02 |
| Local permit | $150 | $125 |
| Labor share | $1,900 | $1,800 |
| Materials/equipment | $1,550 | $1,500 |
These are 2026 planning figures for heat pump water heater installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
A 5% difference on heat pump water heater installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Heat pump water heater installation by type: Cheyenne vs Gillette
Below, each heat pump water heater installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Cheyenne | Gillette |
|---|---|---|
| 40–50 gallon | $2,400–$3,900 | $2,300–$3,750 |
| 65–66 gallon | $2,900–$4,300 | $2,800–$4,150 |
| 80 gallon | $3,400–$5,000 | $3,250–$4,800 |
All figures are 2026 localized planning estimates for heat pump water heater installation — get an actual quote before you commit.
Heat pump water heater installation by tank capacity: Cheyenne vs Gillette
Hybrid heat pump water heaters use a storage tank, so they're sized in gallons by household — but because they recover heat efficiently, a 50-gallon hybrid often serves a home that needed a 65–80 gallon electric tank.
| Size | Cheyenne | Gillette |
|---|---|---|
| 40 gal (1–2 people) | $2,200–$3,700 | $2,150–$3,550 |
| 50 gal (2–4 people) | $2,400–$4,100 | $2,300–$3,950 |
| 65 gal (4–5 people) | $2,800–$4,300 | $2,700–$4,150 |
| 80 gal (5+ people) | $3,100–$4,500 | $3,000–$4,300 |
Heat pump water heater installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Cheapest time for heat pump water heater installation in either city
Tanks fail most in winter when incoming water is cold and demand is high — emergency-rate territory. Replacing a 10+ year-old unit proactively in a slow month avoids the premium.
Tank or tankless — and what should you budget?
Before the brand or the size, the biggest decision in a water heater budget is the format. Here's how our editors think through it.
The simple-swap case
If your current tank suits your household and the budget is tight, a like-for-like tank replacement is the cheapest, fastest job — no gas-line or panel upgrades, done in a morning.
The heat-pump case
A heat-pump (hybrid) water heater costs the most upfront but slashes operating cost and earns the strongest utility rebates where offered — the long-run winner where the install location suits it.
The tankless case
Tankless costs more upfront and may need a gas-line or electrical upgrade, but it lasts longer, never runs out of hot water and trims standby energy loss — strongest for larger households planning to stay put.
Match the format to your household and how long you'll stay. Tank for tight budgets, tankless for endless hot water, heat-pump for the lowest running cost and biggest rebates.
Cheyenne vs Gillette
Is heat pump water heater installation cheaper in Cheyenne or Gillette?
Yes — Cheyenne costs more. Expect around $3,450 for heat pump water heater installation there against $3,300 in Gillette, about $150 (5%) apart in 2026.
Why does heat pump water heater installation cost more in Cheyenne than Gillette?
Labor rates explain most of it — 0.97 in Cheyenne vs 0.93 in Gillette. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is heat pump water heater installation in Cheyenne, WY?
Cheyenne homeowners can expect $2,400 to $4,500 for heat pump water heater installation in 2026, with $3,450 the typical number.
When is the cheapest time to buy heat pump water heater installation — and does it differ by city?
The best window is the same in both Cheyenne and Gillette: Spring and early fall, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during deep winter (failure season).
Should I choose where to live based on heat pump water heater installation cost?
Not really — the $150 gap is one-time, and smart timing and tighter quotes in Cheyenne can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare heat pump water heater installation in other cities
Updated June 2026 · By Serhat Özçelik