Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Heat Pump Water Heater Installation cost: Biloxi vs Southaven (2026)

In 2026, heat pump water heater installation is about 5% more expensive in Biloxi than in Southaven. Most homeowners pay around $3,300 in Biloxi versus $3,150 in Southaven — a gap of roughly $150.

Biloxi MS

$2,300 $4,250

Typically around $3,300

Southaven MS

Lower cost
$2,200 $4,100

Typically around $3,150

Biloxi costs about $150 (5%) more than Southaven for heat pump water heater installation, largely because of the local labor rate gap.
Side by side

Biloxi vs Southaven: full breakdown

FactorBiloxiSouthaven
Typical 2026 cost$3,300$3,150
Estimated range$2,300–$4,250$2,200–$4,100
Labor index (vs US)×0.94×0.9
Climate zoneHotHot
Climate factor×1×1
Local permit$125$125
Labor share$1,800$1,750
Materials/equipment$1,500$1,400

Treat these as 2026 localized estimates for heat pump water heater installation, not quotes from a contractor.

The verdict

Is the gap worth worrying about?

5% is within noise for heat pump water heater installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Heat pump water heater installation by type: Biloxi vs Southaven

Each heat pump water heater installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypeBiloxiSouthaven
40–50 gallon$2,300$3,700$2,200$3,550
65–66 gallon$2,750$4,050$2,650$3,900
80 gallon$3,250$4,750$3,100$4,550

Localized 2026 planning estimates — not quotes. Each city adjusts the national heat pump water heater installation range for local labor, climate and permits.

By size

Heat pump water heater installation by tank capacity: Biloxi vs Southaven

Hybrid heat pump water heaters use a storage tank, so they're sized in gallons by household — but because they recover heat efficiently, a 50-gallon hybrid often serves a home that needed a 65–80 gallon electric tank.

SizeBiloxiSouthaven
40 gal (1–2 people)$2,100$3,500$2,000$3,350
50 gal (2–4 people)$2,300$3,900$2,200$3,750
65 gal (4–5 people)$2,650$4,050$2,550$3,900
80 gal (5+ people)$2,950$4,250$2,850$4,100

Heat pump water heater installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Best time to buy

Cheapest time for heat pump water heater installation in either city

Wait for a winter failure and you're paying rush rates on a unit already past 10 years, when the cold incoming water finally does it in. Replace it on your own schedule in spring or fall and you avoid that premium entirely.

Best window
Spring and early fall
Avoid
Deep winter (failure season)
Off-peak savings
5–10%
Editors' roundtable

Tank or tankless — and what should you budget?

The format choice drives both upfront cost and lifetime value. How our editors think about it.

The tankless case

Tankless costs more upfront and may need a gas-line or electrical upgrade, but it lasts longer, never runs out of hot water and trims standby energy loss — strongest for larger households planning to stay put.

The simple-swap case

If your current tank suits your household and the budget is tight, a like-for-like tank replacement is the cheapest, fastest job — no gas-line or panel upgrades, done in a morning.

The heat-pump case

A heat-pump (hybrid) water heater costs the most upfront but slashes operating cost and earns the strongest utility rebates where offered — the long-run winner where the install location suits it.

Our take

Match the format to your household and how long you'll stay. Tank for tight budgets, tankless for endless hot water, heat-pump for the lowest running cost and biggest rebates.

FAQ

Biloxi vs Southaven

Is heat pump water heater installation cheaper in Biloxi or Southaven?

In 2026, heat pump water heater installation is cheaper in Southaven at about $3,150, versus $3,300 in Biloxi — a difference of about $150 (5%).

Why does heat pump water heater installation cost more in Biloxi than Southaven?

The main driver is local labor rates: Biloxi's labor index is 0.94 versus 0.9 in Southaven. Climate zone (hot vs hot) also shift the total.

How much is heat pump water heater installation in Biloxi, MS?

In Biloxi, heat pump water heater installation typically runs $2,300–$4,250 in 2026, with most homeowners paying around $3,300.

When is the cheapest time to buy heat pump water heater installation — and does it differ by city?

It doesn't vary by location — Spring and early fall is the discount window in both Biloxi and Southaven (roughly 5–10% off), while deep winter (failure season) tends to be the most expensive in either city.

Should I choose where to live based on heat pump water heater installation cost?

Rarely. The $150 difference is real but one-time, and you can often close most of it in Biloxi by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare heat pump water heater installation in other cities

Updated June 2026 · By Serhat Özçelik